Hot Bodies rear aluminum suspension arm set for the Lightning Stadium Truck Series.

Hot Bodies replacement assembled front or rear assembled differential for the Lightning Pro.

Hot Bodies aluminum 3 degree suspension holder for the Lightning Series.

Hot Bodies one way bearing for the engines #'s 28400, 28500, 28501 and 28600.

Hot Bodies replacement spiral differential bevel gear (large diff bevel) for the Lightning Series. This gear is attached to the differential case and mounts in the front or rear gearbox.

Hot Bodies replacement 10 tooth bevel gear (small drive bevel) for the Lightning Series. This gear is in the front or rear gear box and keys into the differential bevel gear.

Hot Bodies pair of replacement rear wheel axle shafts for the Lightning Stadium Truck.

Hot Bodies 14T clutch bell for the Lightning Series. This part goes on the engine crankshaft and houses the clutch shoes.

Hot Bodies package of four rubber sealed bearings used in the Lightning.

Hot Bodies optional hardened steel differential gear set for the Lightning Series. These parts are located inside the differential units.

Hot Bodies set of 4 6x10mm bearings for the Lightning Series of 1/8 scale models. These bearings are used in the steering bellcrank.

Hot Bodies front &/or rear lower suspension arm set for the following vehicles, 55005 1/8 Lightning Stadium Pro RTR or 55006 1/8 Lightning Stadium RR RTR.

Hot Bodies turnbuckle set for the Lightning series.

Hot Bodies pair of replacement turnbuckles for the Lightning Stadium.

Hot Bodies 35CC bottle of air filter oil for use wherever an air filter oil is needed.

Stock replacement Body Mount Set for the Hot Bodies Lightning Stadium Truck. This part supports the body on the chassis.

Hot Bodies front wheel axle shafts for the Lightning buggy.

Hot Bodies replacement screw set for the deck wing holder used on the Lightning Stadium Truck.

Hot Bodies set of 5x10mm sealed bearings for the Lightning series and Big Twin conversion kits.

Hot Bodies 5x8mm sealed bearings for the Lightning Series of 1/8 scale models.

Hot Bodies front suspension holder for the Lightning Series.

Hot Bodies package of ten 3.5mm Shock O-Rings for the Lightning series.

Hot Bodies package of replacement foam body washers for the Lightning. These protect the paint finish on the body.

Hot Bodies Lightning air filter element.

Hot Bodies replacement air filter set for the Lightning Series of 1/8 scale models.

Hot Bodies lower front and rear suspension pins for the Lightning Series Vehicles. These pins hold the lower arms to the bulkheads.

Hot Bodies pair of long shock springs for the Lightning Stadium Truck.

Hot Bodies package of steering ball ends for the Lightning Stadium Truck. These ball ends connect the steering knuckles to the steering bellcrank.

Hot Bodies pair of steering holders (bellcrank posts) for the Lightning Series.