Black Clutch Shoe by OFNA

Ofna antenna tube and mount for the 9.5 Pro Buggy.

Ofna brake/throttle linkage set for numerous Ofna Cars. This mounts to the servo and controls the brake and throttle movement.

Ofna round port manifold for Ofna vehicles. This manifold allows the tuned pipe to be mounted to the proper location on the chassis.

Ofna dual chamber polished tuned pipe for use on Ofna vehicles.

Silicone Shock Seals Set for use on Ofna Shocks.

Ofna super shock seal repair kit.

Ofna pair of 5x10mm ball bearings from Ofna Racing. These bearings can be used anywhere this size is needed.

Ofna replacement front bearing for many Ofna 1/8 Buggy Kits. These mount on the Front Steering Knuckles.

Ofna set of optional blue anodized aluminum wheel hubs.

Ofna replacement front hub carrier for the Ofna 9.5 RTR.

Ofna set of rear uprights for the Ofna Blazer. The rear axles ride in these uprights.

Ofna pair of 8mm rear axles for the 1/8th scale Ofna Ultra Worlds II Off-Road Buggy. These axles install in the rear hubs, are driven by the drive shafts and hold the rear hubs.

Ofna pair of replacement drive axle shafts. This will work on the Ofna GT kits.

Ofna front knuckle arm bushings and screws for the 9.5 RTR Buggy by Ofna.

Ofna Replacement Rear Arm Pins for the Ofna 9.5