Home > O.S. Engines > Gas Helicopter Engines >

  91HZ F3C Competition Helicopter Engine
  91HZ F3C Competition Helicopter Engine
91HZ F3C Competition Helicopter Engine
 
List Price: $649.95
Our Price: $399.95
You Save $250.00!


Stock Status: In Stock
Product Code: OSM18600


Description
 
FEATURES: Designed specifically for F3C aerobatic competition
Rectangular heat sink allows engine to be enclosed entirely inside
cooling shroud
61-B carburetor with thermal insulator to block heat and a needle
valve control lever to control mixture from transmitter
Newly designed piston and crankshaft for reduced vibration and
improved torque stability over entire RPM range
Ball bearing supported crankshaft
Heat sink type backplate
One year limited warranty

INCLUDES: O.S. .91 HZ F3C Competition Helicopter Engine with #8 glow plug,
needle control lever, extra 0.2mm head gasket, cap screws and
instruction manual

REQUIRES: Fuel: 10%-30% nitromethane with at least 18% lubricant. Lubricants
may be either castor or synthetic oil or castor/synthetic blend.
Field Equipment: glow starter, fuel bulb, fuel can filter, fuel pump
hexagonal starting shaft (depending on brand of helicopter)
electric starter, battery and fuel tubing
Muffler-Depending on heli

SPECS:    Displacement: 0.91 cu in (14.95 cc)
Bore: 1.09" (27.7mm)
Stroke: 0.98" (24.8mm)
Output: 3.4 hp @ 15,000 RPM
Practical RPM Range: 2000-16,000
Weight Without Muffler: 1.36lb (618g)
Crankshaft Size: 5/16-24
Height from crankcase bottom to top of cylinder head: 3.9" (99mm)
Height/bottom of mounting tab to top of cylinder head: 3.2" (81.2mm)
Distance between mounting holes same side: 0.98" (25mm)
Distance between mounting holes opposite side: 2.04" (52mm)
Distance between muffler screw holes: 1.6" (42mm)
Distance/bottom of mounting tab to muffler screw holes: 1.7" (42.8mm)
Length from front bearing to backplate: 3.3" (84mm)
Length from backplate to end of crankshaft: 4.9" (125.6mm)
Width of crankcase below mounting tabs: 1.7" (43mm)
Width between mounting tabs: 2.4" (61mm)
 

These might interest you...
O.S. .91 RZ-H Ringed Rear Exhaust
Our Price: $329.95
Add
O.S. .37 SZ-H Ringed
Our Price: $145.95
Add
O.S. .91 RZ-H DH Rear Exhaust
Our Price: $299.95
Add
O.S. .50 SX-H Ringed Hyper
Our Price: $195.95
Add
91HZ-PS 3D PD-08 Pump
Our Price: $449.95
Add
91HZ-PS 3D PD-08 Pump


 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

O.S. Engines > Gas Helicopter Engines
Nitro Engines > Helicopter Engines
Nitro Engines
O.S. Engines


Dubro Devcon Dev Tube 1 Oz $4.25
Futaba R124H 4-Channel AM Receiver 72MHz w/o Crystal $34.95
Traxxas Left & Right Gearbox Halves Jato $4.50
Hot Bodies Turnbuckle 4X83MM Stadium (2) $7.45
Basher Tires Pin Head Mounted Chrome Traxxas Rustler/Stampede/Jato/Nitro Sport $33.95
Align GP750 Head Lock Gyro Combo $159.95
 
(Your shopping cart is empty)