AKA Racing 1/10 Buggy Impact 4WD Front Super Soft Tire (2) AKA13307V
AKA13307V AKA Racing 1/10 Buggy Impact 4WD Front Super Soft Tire (2)

AKA Racing 1/10 Buggy Impact 4WD Front Super Soft Tire (2) AKA13307V

reg $15.50
$10.95

In Stock.

This item qualifies for FREE SHIPPING

AKA Racing pair of tire two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable. The IMPACT is built on AKA's latest carcass design featured on our ENDURO and WISHBONE tires.

Tread Performance
Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.

Lifespan:
The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.

Balance:
Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.

Mold Accuracy:
AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

Features:

  • Dense small square lug pattern with offset lug rows in the center for  maximum traction and good wear characteristics
  • Two parallel outer rows of lugs create a groove to give the tire a   predictable side bite
  • Super soft firmness compound


Requires:
Tire Glue
1/10 scale Front Buggy Wheels

Width: 1.1" (28.5mm)
Inner Diameter: 2.2" (56mm)
Outer Diameter: 3.2" (81mm)

Review Summary