Dumas Aeronca C-3 Kit DUM1813
DUM1813 Dumas Aeronca C-3 Kit

Please Note: Color and/or graphics may differ from image shown

Dumas Aeronca C-3 Kit DUM1813

Add $99.00 to receive Free Shipping...click for eligibility
reg $0.00
$41.95

Out of Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Dumas Aeronca C-3 Kit.

Features:
  • Constructed of hand selected laser cut balsa
  • Vacuum molded nose cowl
  • Rudder Control: Pull-pull cables
  • Elevator Control: Wire pushrod
  • Servo Placement: Mounted in rails on fuselage
  • Landing Gear: 1/16" diameter wire front, .041 diameter wire rear, requires bending
Requires:
GWS IPS (indoor power system) motor with "A" ratio gear drive
3 channel radio system (minimum)
2 micro servos
5A ESC w/BEC
2 cell 700mAh LiPo battery
GWS 8x6 prop
Building and field equipment
Length: 22" (559mm)
Wingspan:
40" (1016mm)
Wing Area:
329 sq.in. (21.25 sq dm)
Airfoil:
Flat bottom, high wing placement
Center of Gravity (CG):
2.5" (63mm) back from the leading edge of the wing at the fuselage side

Review Summary