The Airtronics RX461 (92010) 4-Channel 2.4GHz FHSS-4T Surface Receiver is a Super Response, Telemetry-capable receiver that is used with the Airtronics MT-4 2.4GHz FHSS-4T transmitter. The Airtronics RX-461 Surface Receiver supports Airtronics Telemetry and features an extremely low latency time and high frame rate, making you feel more connected to your modelhan ever. The Airtronics RX-461 Surface Receiver works equally well in cars, trucks and boats.Features:
- One-Touch Binding
- Single Receiver Antenna
- Convenient, lightweight setup
- Compatible with Airtronics 2.4GHz FHSS-4T Capable Surface Transmitters (MT-4)
- High Frame Rate, Low Latency FHSS-4T Technology
- Servo Mode Selectable (Normal, SHR and SSR)
- Nominal Input Voltage Up to 7.4v Allows Use of 7.4 Volt Servos
- SSR setting for the fastest response time
- Works great in cars, trucks and boats
- Comes with ‘Z’ connector
In standard Airtronics fashion, the Airtronics RX-461 Surface Receiver features a push-button binding procedure, dual antennas for easy installation and flexibility, and it's all packed in a convenient, lightweight setup
When the RX-461 Surface Receiver is used with the Airtronics MT-4 4-Channel 2.4GHz FHSS-4T transmitter and the Airtronics Temperature and RPM/Speed sensors (available separately), real-time telemetry is now an option.
The Airtronics RX-461 Surface Receiver can be used with Airtronics SRG Digital servos, giving you the option of the SSR setting for the fastest response time. The combination of using Airtronics Digital servos and using the correct Servo Mode setting results in the ultimate feel and response, making you more in control of your modelhan ever.
The Airtronics RX-461 Surface Receiver is currently compatible with ONLY the MT-4 4-Channel 2.4GHz FHSS-4T transmitter.Note:
All Airtronics 2.4GHz FHSS-4T surface receivers now have a Nominal Input Voltage rating of 4.8v ~ 7.4v.
Frequency/Modulation Type: 2.4GHz/FHSS-3
Nominal Input Voltage: 4.8v ~ 7.4v
Weight: .021 lbs (0.34oz)
Dimensions: 1.43 x 1.04 x 0.64in (36.2 x 26.5 x 16.3mm)
Fail Safe: Yes (Programmable on All Channels)
Receiver Battery Fail Safe: Yes (3.8v Default / 3.5v ~ 5.0v Adjustable)
Connector Type: Universal 'Z'
This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack. Do NOT use a 3S Li-Po battery pack!
When using a 2S Li-Po battery pack you should NOT use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos.
You can use Analog or Digital servos with this receiver. For the best results, we recommend using Digital servos.