Align 3S1P 11.1V 2200mAh/30C Battery AGNHBP22001
AGNHBP22001 Align 3S1P 11.1V 2200mAh/30C

Align 3S1P 11.1V 2200mAh/30C Battery AGNHBP22001

reg $26.99
$32.95

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Align 11.1V 2200mAh/30C 3S Li-Polymer Battery.

Features:
  • This Li-poly battery features high efficient and high discharge
  • Suitable for T-Rex 450 series and other professional model airplanes and/or cars
Note: When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance. Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/charge batteries at the temperature up to 35C in an airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down (about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Do not leave the charger is operating unattended as it may cause a fire.
Max Continuous Discharge: 30C (66A)
Burst Discharge: 40C (88A)
Normal operating temperature: approx. 40-65C (within 80% of rated discharge)
Max. Temperature: 80C.
Output: 11.1V (3S1P) Nominal, 2200mAh
Dimension: 104x36x22mm
Weight: 165g

Note: It?s recommend to discharge the battery within 80% of rated discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)

Review Summary