This is the Align 600DFC Main Rotor Head Upgrade for the T-Rex 550E and 600E Pro Flybarless System.Features:
- Extreme low CG and short main shaft design, dramatically reduces flight resistance, effectively improves T-Rex 600’s 3D performance and speed.
- Two part detachable main blade grips for ease of maintenance and assembly.
- New style linkage rod design, complete assembly increases linkage rod rigidity, allowing the pitch slider (follower) to be omitted, resulting in a head assembly that is much simplified and rigid.
- Upgrading to the 600DFC rotor head assembly is extremely easy; just replace the head block included in the 600DFC kit, replace the blade grip pitch lever with the new 600DFC lever, connect the 600DFC linkage assembly, and replace the main shaft with 600DFC main shaft. Existing swashplate and newer main rotor grips are kept in the upgrade.
One Align 600 DFC Main Rotor Head Assembly (44.45x43x17mm), two 600 Feathering shaft sleeves-black(8x10x31mm), two 600 Damper rubber-black(7.9x13x6.5mm), one M3 Set screw, three Socket collar screw(M3x19mm), two 600DFC Main Blade Grip Arms, two 600DFC Main rotor grip arm integrated control link (9x11x37.2mm), two Collar(3x4.9x5mm), four 683ZZ Bearing(3x7x3mm), two 700DFC Linkage rod A(M3x14mm), two 700N Elevator ball link , one 600DFC Main Shaft(10x163.3mm), four Socket collar screw(M3x6mm), two Washers (3x4.8x0.3mm) , and two 700N Linkage Ball B (5x12mm)