Align T-Rex 700E Pro DFC Super Combo AGNRH70E07X

Add $99.00 to receive Free Shipping...click for eligibility
reg $1,578.99
$1,449.95

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the brand new Align T-Rex 700E Pro Electric DFC Helicopter Super Combo with a 3GX Programmable Flybarless System included.

T-Rex 700E DFC Features:
  • New style swash anti-rotation guide with embedded anti-wear material minimizes the wear between swashplate long ball and guide
  • Brand new tail blade designed to sustain optimal tail locking performance under high head speed and extreme flight conditions
  • Integrated servo mounts on the main shaft bearing blocks, allowing cyclic servos to be mounted directly onto the bearing blocks, with the composite material frame plates creates a clean and uncluttered look
  • Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection
  • Motor mount consists of third bearing block to provide motor shaft support; effectively reducing torque induced shifts, and minimizes gear striping issue
  • Top mounted ESC platform to take advantage of main blades airflow for effective cooling
  • 800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; it's capable of maintaining consistent torque and head speed through continuous 3D maneuvers
  • High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision
  • High precision bearing supported dual push point rudder control design
  • Equipped with third bearing main shaft support to increase rigidity, meeting the needs of extreme 3D maneuvers
  • New style wrap around airbrushed fiberglass canopy, with aerodynamic form to reduce wind resistance. 4 point anti-vibration mounts for quick install and removal
  • New CNC aluminum alloy mounting plate
  • Equipped with the low CG DFC rotor head, effectively reduces wind resistance during flight, provides the most direct and precise control, and exhibits exhilarating 3D performance and unimaginable flight speed
  • Equipped with brand new 700 3G carbon fiber main blades, designed specifically for extreme 3D flights, featuring agility and stability, and new graphics paint scheme. The increased blade rigidity improves ant torsion characteristic during flight, and the new airfoil minimizes turbulence near the blade tip, reducing blade noise and power loss
  • Brand new CCPM direct servo linkage designed to eliminate the weight of double push-pull linkage system, enabling faster and more precise control reaction
  • Utilizes composite carbon material integration on frame structure for ease of maintenance and high rigidity
  • Increased front opening area to allow for simpler battery installation
  • Top mounted motor base brings the motor's center of gravity closer to rotating disc, improves 3D agility and allows blade drafts to cool the motor effectively
  • Utilizes high spec MOD1 112T CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and minimize gear noise during flight
  • New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation
  • Brand new gear box with more streamlined design also allows for simpler disassembly
  • High torque rated one way bearing base
  •  High speed rated thrust bearings incorporated into tail blade grips
  • New lightweight landing gears

3GX Programmable Flybarless System Features:
  • New redesigned 3GX represents a completely new generation of multi-function flybarless systems. The 3GX will dramatically improve your heli's performance
  • Currently the lightest and smallest flybarless system available on the market
  • Two ports so you can directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system
  • Based on the 3G FL760 manual setup process, the 3GX can be setup in as little as a few minutes
  • Additionally, the 3GX can support all of the CCPM swashplate systems that are currently available on the market- including 90, 120, 135, and 140 degree swashplates
  • Graphic illustrated instructions on the computer setup software instructs you through a step by step setup process, giving you a quick  and painless setup time without omitting any steps
  • Supports Bluetooth connectivity- With the much anticipated and soon to be released Bluetooth connectivity kit, the 3GX can be programmed (wireless) from a PC
  • Built in Align RCE-G600 governor function, so a external governor isn't required to reduce electronic wire clutters
  • Custom parameters have been opened up in the 3GX to allow you to fine tune a variety of settings for swashplate and rudder. Settings export feature allows custom settings to be shared with your friends
  • Utilizes brand new gyroscope sensors, with the highest specifications when compared to other flybarless systems currently on the market. This allows it to be used under harsher than normal conditions. Its dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation of 3G
  • Suitable for helicopter of all class from 250 to 800, glow engine or electric powered
  • 3GX utilizes 16 bit processor, 4 times faster than the previous generation, along with completely re-written firmware
  • With built in pirouette compensation function, the 3GX is able to stabilize your heli on a fixed point during pirouetting maneuvers
  • 3GX's rudder provides consistent rudder feel, even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter
  • Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home

Includes:
One Align T-Rex 700E Pro Electric DFC Helicopter with one 3GX Flybarless system, one set of  700 3G Carbon Fiber Blades, three DS615 digital servos, one DS655 Digital servo, one Aluminum Tail Boom, one 3K Carbon Fiber Tail Boom, one 800MX Brushless Motor(520KV), one Castle ICE2 HV 120 Brushless ESC, one 6A External BEC w/ 5.1V Two-way Step-down voltage regulator, and one set of  105mm 3K Carbon Fiber Tail Blades

Requires:

Transmitter - 7-channel or more, helicopter system
Receiver- 7-channel or more
Battery - 6S Li-Po 4500 ~ 5200mAh x 2  or 2S Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge
3GX Programmable Flybarless System
Operating Temperature:
-10~60 degrees
X and Y axis Operating Angle Range: -300~+300 degrees
Z axis Operating Angle Range: -600~+600 degrees
Size:   1.43x0.99x0.61in (36.5x25.2x15.6mm)
Weight: 0.38oz (11g)
Maximum working voltage: 8.5V

T-Rex 700E DFC
Length:
53.14 (1350mm)
Height: 14.17 (360mm)
Width: 8.18 (208mm)
Main Blade Length: 27.55 (700mm)
Main Rotor Diameter: 62.28 (1582mm)
Tail Rotor Diameter: 11.06 (281mm)
Motor Drive Gear: 12T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.37
Weight (with motor): 7.29lbs (116.7oz)
  • Align T-Rex 700

Review Summary