Associated RC18B2 Brushless 2.4GHz RTR ASC20108

Add $99.00 to receive Free for eligibility
reg $329.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
Associated RC18B2 Brushless has a newly designed chassis with a fully enclosed, 2-belt drive train system with adjustable slipper clutch that is capable of handling the extreme amount of power that today's brushless motors and LiPo batteries can dish out.

The RC18B2 Brushless comes fully assembled including a painted and decaled buggy body, white dish style wheels with aggressive mini pin race tires, and factory installed Reedy brushless electronic speed controller and powerful 5000kV brushless motor. Just charge up the battery and get ready to throw up a big roost! Big time fun in a small package is what makes the RC18B2 Brushless another champion by design!

Transmitter Batteries: 8 AA
Building and track equipment
  • Chassis: Molded composite
  • Drive: Four wheel, two belt sealed drivetrain handles most brushless/ LiPo combos
  • Shocks: Oil-filled composite bodies with adjustable pre-load
  • Radio: XP2G 2.4GHz 2-channel Radio System
  • Motor: Brushless
  • Electronic Speed Control: XPS micro with reverse, switchable to forward only for racing
  • Battery: 6-Cell 1100mAh NiMH
  • Battery Charger: 110V AC wall type mode
  • Ball Bearings: Complete set, 15 total
  • Differentials: Planetary gear
  • Body: 0.03" (0.8mm) painted and trimmed with rear wing
  • Pinion Gear: 12 tooth steel
  • Spur Gear: 60 tooth nylon
  • Steering: Dual bellcrank with newly designed servo saver for optimal straight line tracking
  • Battery Strap: Nylon, hinged for quick battery changes
  • Wheels: Dish racing type, white in color Front 0.87" (22.2mm) wide, 1.3" (33.5mm) diameter Rear 1.1" (28.1mm) wide, 1.3" (33.5mm) diameter
  • Tires: Mini pin Front, 2.2" (56mm) diameter, 0.94" (24mm) wide Rear, 2.2" (56mm) diameter, 1.1" (29mm) wide
  • Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle
Length: 9.9 inches (252mm)
Width: 7.2 inches (182mm)
Track: 7.2 9 inches (182mm)
Wheelbase: 6.5 inches (165mm)
Weight: 17.6oz (500g)
Gear Ratio: 2.0: 1

Length: 6.7 inches (170mm)
Width: 3.4 inches (86mm)
Height: 2 inches (51mm)
  • Associated RC18 B2

Review Summary