Associated RC18T2 Brushless 2.4GHz RTR ASC20104

Add $99.00 to receive Free for eligibility
reg $329.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Associated RC18T2 1/18 scale 4WD Electric Off-Road Truck. Associated RC18T2 Brushless chassis has a fully enclosed, 2-belt drive train system with adjustable slipper clutch that is capable of handling the extreme amount of power that today's brushless motors and LiPo batteries can dish out.

The RC18T2 Brushless comes fully assembled including a painted and decaled truck body, white dish style wheels with aggressive mini pin race tires, and factory installed Reedy brushless electronic speed controller and powerful 5000kV brushless motor. Just charge up the battery and get ready to throw up a big roost! Big time fun in a small package is what makes the RC18T2 Brushless another champion by design!

One Associated RC18T2 Off-Road Truck RTR with 370 size motor, XP2G 2.4GHz 2-channel Radio System, NiMH battery, wall charger, ESC with reverse, painted body and an instruction manual

AA Batteries: 8 for transmitter
Building and track equipment
  • Chassis: Molded composite
  • Drive: 4 wheel, two belt sealed drivetrain with adjustable slipper clutch
  • Body: Painted and trimmed 0.03" (0.8mm) thick polycarbonate
  • Radio: XP2G 2.4GHz 2-channel Radio System
  • Battery: 6-Cell 1100mAh NiMH
  • Battery Charger: 110V AC wall type mode
  • Motor: Brushless
  • Electronic Speed Control: XPS micro with reverse, switchable to forward only for racing
  • Shocks: Oil-filled composite bodies with adjustable pre-load
  • Ball Bearings: Full set, 15 total
  • Shocks: Composite body, oil-filled with adjustable pre-load
  • Tires: Mini pin 2.2" (56mm) diameter, 1.1" (29mm) wide
  • Wheels: Dish type 1.1" (28.1mm) wide, 1.3" (33.5mm) diameter, white in color
  • Steering: Dual bellcrank
  • Battery Strap: Nylon, hinged for quick battery changes
  • Pinion Gear: 12 tooth steel
  • Spur Gear: 60 tooth nylon
  • Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle
Length: 9.9 inches (252mm)
Width: 7.2 inches (182mm)
Weight: 1.1lb (505g)
Wheelbase: 6.6 inches (167mm)
Gear Ratio: 2.0: 1

Length: 8.8 inches (225mm)
Width: 3.8 inches (98mm)
Height: 2.6 inches (67mm)
  • Associated RC18 T2

Review Summary