SHOCK SET TEAM 1.02 REAR RC10

Shocks are not standard on any car, but can be used for oval racing to lower the rear end on the Associated buggies.

Hard Anodized Aluminum.
          Teflon Coating
           EZ Load Shock Seal Assembly
           Green Color w/Black Hats.
          Shaft Exits through Double O-Ring Seals.

 INCLUDED:  Two Shock caps,Two 1.02 shock shafts, Two Shock ends, One Assembly tool, Two Pistons, Two Upper pivots, Two Lower pivots, Four 4-40x3/4" screws, Four #4 washers, Four 4-40 lock nuts, Several e-clips, Two Seal sets, One Assembly instructions

REQUIRED: - spring clamps & cups.
ASC 6480- Green springs (med) or ASC 6478- Silver springs (firm).

Shock oil.  See Associated all other parts.