FEATURES: One speed control for brushless and brushed motors Forward/Brake only style for brushless and brushed motors ADPC six power profiles to adjust the Sphere Competition ICE Drive-LRP's secret design results in lower running temperature Autocell System-NIMH-LIPO automatic adaption 4 adjustable modes, NiMH/LiPo ADPC, Power Profiles, Initial Brake, Automatic Brake Small and lightweight Blue metallic case External solder tabs Sensered Technology for a high precision and intelligent motor management-perfect drive feeling 100% Digital technology Intuitive QC-style programming Universal receiver plug Standard 7.2V battery connector on 13 gauge wires (Tamiya/JST) Bullet style motor connectors Pre-installed on/off switch Limited Lifetime Warranty German Technology.

INCLUDES: One Sphere ESC with pre-attached female bullet motor connectors One teal colored LRP Heat Sink One 1-1/2"X1-1/2" piece of double sided tape Three small capacitors. (these improve ESC performance, solder these between the + and - on the Spheres soldering tabs) Four small black plastic zip ties Two extra 10" 14 gauge wires (orange/yellow) Three extra 7-1/2" lengths of wire (black/blue/red) One extra wire no-solder lead (orange) One extra pair of no-solder leads (blue/yellow) One small plastic screw driver (pillips/standard) One instruction sheet One sheet of LRP decals

REQUIRES: Brushless motor over 3.5 turns Brushed motor over 5 turns

SPECS: Length: 1.3" (33.1mm) Rated Current: 400A/phase Width: 1.5" (37.6mm) Typical Voltage Drop (brushless): 0.18V@20A Height: 0.59" (14.9mm) Typical Voltage Drop (brushed): 0.13V@20A Weight: 0.86oz (24.5g) B.E.C.: 5.5V/3.0A Voltage input: 4-7 cells (4.8-8.4V)