DuraTrak charger peak charges Nickel-Cadmium batteries using specialized peak charging technology as well as Nickel-Metal Hydride batteries, plus Discharging and Cycling features not commonly found in other chargers. "Negative Delta V" Peak Detection for NiCds and NiMHs Built-in Artificial Intelligence to eliminate false peaks Auto-identifies the quantity of cells being charged Computerized control, 8-bit 4MHz CPU with 8K ROM, 1K RAM, 1-channel 16-bit analog-to-digital converter. High efficiency P-Channel MOSFET drive transistors 11-15V DC input Built-in AC Power Supply Output: 4-7 cells on DC, 4-8 cells on AC Adjustable fast Charge current of .5-4A AC, .5-6.5A DC (Note: 3A maximum Charge rate recommended with NiMH packs.) Pulsed fast Charge, with 8-bit pulse width modulated current control output. 100mA TRICKLE Charge 1A fixed Discharge rate. Fixed 2.60V Discharge cutoff voltage- (see COMMENTS). Not designed for Discharging A or AA size (and smaller) cells. Cycle functions: Select a single Discharge/Charge cycle for periodic pack conditioning, or continuous "auto-repeat" cycles for reviving batteries that have developed a memory, or breaking in a new pack. Four multi-function, high intensity LED indicators. Status light glows during charge, flashes when nearing peak. Audible mode select tone signals for easy set-up Reverse polarity and fused overload protection Designed to charge sub-C battery packs.

INCLUDES: One IntelliPeak AC/DC Pulse Charger w/5' AC Power Cord One Standard Battery Connector with wire lead (Kyosho-type) One DC power cord with alligator clips One Instruction Sheet One DuraTrax Decal Sheet

DC power source of 11-15V OR AC 110V AC (US Standard) Battery pack with and Standard Connector (Tamiya-type)