E-Flite Cessna 150 Aerobat 250 ARF Airplane EFL5050
EFL5050 E-Flite

E-Flite Cessna 150 Aerobat 250 ARF Airplane EFL5050

reg $164.99
$119.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
International Shipping Restriction
This is the E-Flite Cessna 150 Aerobat 250 ARF Airplane.

Features:

  • Balsa construction with fiberglass cowl and wheel pants
  • Magnetically secured plug-in wings and cowl
  • Pre-hinged ailerons and rudder controls
  • Easy access hatch with spring-loaded latch
  • Authentic scale outline and lightweight UltraCote ParkLite trim scheme
  • Laser-cut engineered to be as light as possible
  • Clear front, rear, side and skylight windows
  • Easily assembles in a single evening
  • Quick release struts
  • E-flite aluminum spinner available separately (EFLSP100)
  • Recommended for use with the New Park 280 Motor (EFLM1140)
  • Recommended for use with the New 3.5-Gram DS35 Digital Super Sub-Micro Servo (EFLRDS35)

The E-Flite Cessna 150 ARF is for RC pilots that are seeking the thrill of basic aerobatics in a small yet detailed package. This all-wood, clever model remarkably maintains the character and subtle curves of the original aircraft, yet is distinctively tricked out with a checker-scheme that honors the character of the Aerobat.

Requires:

4+ channel Transmitter and Receiver radio system
Four (4) sub-micro servos
Flight Battery and compatible Charger
Motor
Propeller
ESC
Wingspan: 37.9 in (962mm)
Overall Length: 27.2 in (690mm)
Wing Area: 196 sq in (12.65 sq dm)
Flying Weight: 12.0-13.7 oz (340-388 g)
Motor Size: 250- to 280-size Brushless Outrunner
Radio: 4 channels minimum
Servos: 4 super sub-micro servos required
Trim Scheme Colors: White, Orange, and True Red
CG (center of gravity): 1-3/8 to 1-11/16 in (35-43mm) back from the leading of wing at wing root
Prop Size: 7 x 3.5
Spinner Size: 1.00 in
Speed Control : 10-Amp
Recommended Battery: 2S 430mAh - 3S 450mAh Li-Po
Control Throw (Ailerons): Low: 7mm up/down; High: 9mm up/down
Control Throw (Elevator): Low: 12mm up/down; High: 16mm up/down
Control Throw (Rudder): Low: 11mm right/left; High: 15mm right/left
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Indoor/Outdoor
Assembly Time: 5-7 Hours
Is Assembly Required: Yes

Review Summary