E-Flite Inverza 280 BNF Basic Airplane EFL6350

Add $99.00 to receive Free Shipping...click for eligibility
reg $229.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
International Shipping Restriction
This is the E-Flite Inverza 280 BNF Basic Airplane.

  • Hollow-molded foam construction with carbon fiber reinforcement
  • High-power BL280, 1800Kv outrunner power system installed
  • Two-piece wing with easy-access attachment and carbon fiber joiner
  • Large, double-beveled control surfaces attached with CA hinges
  • Ready to bind to your DSM2/DSMX transmitter
  • High-speed digital servos and Spektrum Nanolite receiver installed
  • High-performance custom propeller and matching spinner
  • Magnetic top and bottom hatches provide instant access
  • Robust wire landing gear and steerable tail wheel
  • Minimal assembly and setup required

The E-Flite Inverza 280 BNF Basic Airplane is a collaborative original design by full-scale aerobatic aircraft craftsman Kevin Kimball, RC aerobatic world champion Quique Somenzini, and aviation artist Mirco Pecorari. Never before has an aerobatic aircraft been developed with a more dynamic team effort.

The Inverza 280’s unique blend of grace, performance, and potency gives you exceptional aerobatic performance for precision, 3D, or scale flight, sized for you to enjoy at a convenient park or small field.

Everything about the E-Flite Inverza 280’s design, from its original outline to its fit and finish, reflects exceptional attention to the needs of performance minded pilots. As soon as you open the box, its design clearly reflects what experience has been missing from the world of aerobatics.


Full-range 4+ channel DSM2/DSMX aircraft transmitter with adjustable dual rates and expo
11.1V 3S 450mAh LiPo flight battery
Charger for flight battery
Wingspan: 26.0 in (660mm)
Overall Length: 26.0 in (660mm)
Wing Area: 162.0 sq. in. (10.41 sq. dm.)
Flying Weight: 8.3 oz (235 g)
Motor Size: 280-size brushless outrunner (installed)
Radio: 4+ channel DSM2/DSMX transmitter
Servos: (4) 3.5 g digital servos (installed)
Wing Loading: 7.7 oz/sq ft (23.5 g/sq dm)
Prop Size: 6.8 x 3.5
Spinner Size: 1.18 in (30mm)
Speed Control : 10-amp brushless (installed)
Recommended Battery: 11.1V 3S 450mAh LiPo
Control Throw (Ailerons): Low: 12mm up/down, 30% expo; High: 25mm up/down, 40% expo
Control Throw (Elevator): Low: 7mm up/down, 20% expo; High: 35mm up/down, 60% expo
Control Throw (Rudder): Low: 8mm right/left, 20% expo; High: 20mm right/left, 35% expo
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Indoor/Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes
CG (center of gravity): 77mm ahead of the trailing edge at wing tip
Trim Scheme Colors: Purple, yellow

Review Summary