E-Flite Mini Pulse XT ARF Airplane EFL2375
EFL2375 E-Flite

Please Note: Color and/or graphics may differ from image shown

E-Flite Mini Pulse XT ARF Airplane EFL2375

Add $99.00 to receive Free Shipping...click for eligibility
reg $179.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
International Shipping Restriction
This is the E-Flite Mini Pulse XT ARF Airplane.

  • Lightweight balsa and lightweight plywood construction
  • Factory-installed hinges and control horns
  • Factory-painted aluminum landing gear with fiberglass wheel pants
  • Factory-painted cowl
  • Covered in genuine UltraCote
  • 95% factory-built; get flying in 3 hours or less
  • Firewall accepts E-Flite Park 450 Brushless Outrunner without modifications
  • Bolt-on wing and tail
  • Steerable tail wheel
  • Easy-access magnetic battery hatch
  • Design based on Hangar 9's popular Pulse 40 XT

E-flite used top-quality materials and leading engineering in the Mini Pulse XT, so you’ll get the maximum level of fun and value. E-flite also backs all of its products with the best support and customer service in the hobby, so your rc flight experience is always a great one.

E-flite Park 450 BL Outrunner Motor
E-flite 30A Pro Switch-mode BEC Brushless ESC
E-flite S75"Sub-Micro Servos (4)
6-channel micro receiver
4-channel or greater Radio
11.1V 3-Cell 2100mAh Li-Po Battery
Wingspan: 42.5 in (1080mm)
Overall Length: 37.5 in (875mm)
Wing Area: 330 sq in (21.3 sq dm)
Flying Weight: 25-27 oz (795-965g)
Motor Size: Park 450 BL Outrunner, 890Kv
Radio: 4 channels
Servos: 4 sub-micros
Trim Scheme Colors: UltraCote White (#870), Deep Blue (#873), and Orange (#877)
CG (center of gravity): 2-3/4 in (70mm) behind the leading edge
Prop Size: 10x8 Electric
Hardware Included: Yes
Speed Control : 30A Pro SB Brushless
Recommended Battery: 2100 mAh 3-cell 11.1V Li-Po
Control Throw (Ailerons): 3/8 in (9mm) Low Rate or 1/2 in (13mm) High Rate
Control Throw (Elevator): 1/4 in (6mm) Low Rate or 1/2 in (13mm) High Rate
Control Throw (Rudder): 1-1/4 in (32mm) Low Rate or 1-1/2 in (38mm) High Rate
Scale: Park Flyer
Approx. Assembly Time: 3 hours
  • E-Flite Mini Ultra Stick

Review Summary