E-Flite Mini Ultra Stick ARF Airplane EFL2250
EFL2250 E-Flite

E-Flite Mini Ultra Stick ARF Airplane EFL2250

Add $99.00 to receive Free Ground Shipping*
reg $164.99
$119.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
International Shipping Restriction
This is the E-Flite Mini Ultra Stick ARF Airplane.

Features:

  • 95% factory-built; get flying in 2 hours or less
  • Two firewall options to use a variety of motor sizes, types & brands
  • Control surfaces have factory-installed hinges and control horns
  • Optional quad-flap configuration
  • Covered in genuine Hangar 9 UltraCote
  • Easy access top battery hatch
  • Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer
  • Lightweight balsa and plywood construction
  • Includes molded firewall stick mount
  • Bolt-on tail requires no gluing and secures with two lock nuts
  • Tough, lightweight aluminum landing gear that's factory-assembled and tall enough to accommodate larger prop sizes
  • Great match for E-flite Park 450 Outrunner Brushless Motor
  • Design based on Hangar 9’s popular line of Ultra Sticks

Requires:

Brushless Motor
Brushless ESC
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions and Y-harness
4 to 6-Ch Receiver
LiPo Battery
LiPo Charger
CA
Propeller
Wingspan: 38.75 in (985mm)
Overall Length: 34 in (865mm)
Wing Area: 325 sq in (21 sq dm)
Flying Weight: 22 - 25 oz (625 - 710g)
Motor Size: Park 400 Inrunner or Park 450 Outrunner
Radio: 4-channel or greater (7-channel for quad flaps)
Servos: 4 sub-micros (6 sub-micros for quad flaps)
Trim Scheme Colors: UltraCote Fluourescent Blue, Flame Red, Transparent Red & White
CG (center of gravity): 2.50 in (63mm) behind the leading edge
Prop Size: 10x7 - 11x7
Hardware Included: Yes
Speed Control : 20A Brushless
Recommended Battery: 2100 mAh 3-Cell 11.1V Li-Po
Flaps: Yes (optional)
Control Throw (Ailerons): 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate
Control Throw (Elevator): 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate
Control Throw (Rudder): 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate
Approx. Flying Duration: 10-20 minutes
Scale: Park Flyer
Approx. Assembly Time: 1-2 hours
Gear Ratio: 6.5:1 when using Park 400 Brushless Inrunner
  • E-Flite Mini Pulse XT

Review Summary