E-Flite Mystique RES 2.9m ARF Airplane EFL4915
EFL4915 E-Flite

Please Note: Color and/or graphics may differ from image shown

E-Flite Mystique RES 2.9m ARF Airplane EFL4915

Add $99.00 to receive Free Shipping...click for eligibility
reg $499.99
$349.99

In Stock.

This item qualifies for BUNDLE & SAVE
International Shipping Restriction
This is the E-Flite Mystique RES 2.9m ARF Airplane.

Features:

  • Options included for electric motor power or pure sailplane flight
  • All wood, plug-in wings with pre-hinged spoilers
  • Large canopy provides easy access to equipment and batteries
  • Two-piece, plug-in stabilator
  • Genuine Hangar 9 UltraCote and UltraCote Lite film covering
  • Streamlined fiberglass fuselage with built-in fin
  • Heavy-duty carbon fiber wing and stabilizer joiners
  • Rudder, elevator and spoiler control

The E-flite Mystique RES 2.9m ARF sailplane was inspired by the popular full-house Mystique 2.9m, except that it has been specifically modified for exquisite performance with only elevator, rudder, and spoiler controls.

The Mystique RES’s large wingspan was built with just the right amount of polyhedral to give you gentle flight characteristics, but still have the authority to turn abruptly into a thermal the instant it's sensed.

Built-in spoilers offer the ability to dump lift so you have control to escape a thermal and perform spot landings with greater precision. The Selig S3021 airfoil provides excellent handling over a wide speed range, plus the all-wood open-wing construction keeps weight to a minimum so you can take advantage of even the smallest amount of lift. The contour of the molded fiberglass fuselage is sleek yet provides ample room for its pushrods to run internally and still have room for a powerful LiPo motor battery.

Requires:
Common radio equipment
4+ channel full-range transmitter and receiver radio system
(2) micro servos, (2) thin wing servos
Charger for flight/receiver pack

Pure glider setup requirements:
700–1300mAh 4.8–6.0V receiver pack
Hi-start or winch

Powered setup requirements:
25-size brushless outrunner motor
60-amp brushless speed control
3200mAh 3S 11.1V Li-Po flight battery
14 x 8 folding propeller and 40mm spinner with folding blade hub
Wingspan: 114 in (2.90 m)
Overall Length: 58.5 in (1.48 m)
Wing Area: 1030 sq. in. (66.5 sq. dm.)
Flying Weight: 4.85-5.00 lb (2.20-2.25 kg)
Motor Size: Power 25
Radio: 4+ channel full-range radio system
Servos: (2) micro servos, (2) thin wing servos
Trim Scheme Colors: UltraCote White (U870), Transparent Yellow (U967)
CG (center of gravity): 7.68-8.27 in (195-210mm) back from leading edge
Wing Loading: 9.5?10.5 oz/sq ft (29.0?32.0 g/sq dm)
Prop Size: 14 x 8 folding
Spinner Size: 40mm with folding hub
Speed Control : 60-amp brushless
Recommended Battery: 11.1V 3S 3200mAh Li-Po
Control Throw (Elevator): 23mm up, 20mm down
Control Throw (Rudder): 50mm up/down
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 3-5 Hours
Is Assembly Required: Yes

Review Summary