E-Flite PA-20 Pacer 10e ARF Airplane EFL2790
EFL2790 E-Flite

E-Flite PA-20 Pacer 10e ARF Airplane EFL2790

Add $99.00 to receive Free Ground Shipping*
reg $209.99
$149.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
International Shipping Restriction
This is the E-Flite PA-20 Pacer 10e ARF Airplane. E-Flite’s PA-20 Pacer 10e airplane beautifully replicates the full-scale Pacer for RC pilots that want an iconic scale experience that’s great for hopping out of small fields.

Features:
  • Laser-cut balsa and plywood construction
  • Ready-to-mount the E-flite Power 10 brushless motor
  • Scale cockpit detail (pilot not included)
  • Two-piece, plug-in wing with carbon fiber wing tube
  • Large, easy-access belly hatch
  • Classic lines and highly accurate scale proportions
  • Genuine Hangar 9 UltraCote covering
  • Pre-painted fiberglass cowl and wheel pants
  • Four-channel control with optional flaps
  • Scale wire landing gear assembly

Not only does the E-Flite PA-20 Pacer’s color scheme and outline closely honor the original, but you’ll also get scale looking landing gear, high-end interior appointments, plus optional flaps for greater control at a wider range of speeds.

From the authenticity of its traditional construction to the richness of its high-gloss fiberglass cowling and UltraCote finish, the E-flite PA-20 Pacer 10e ARF delivers a scale modelith outstanding flight characteristics so that you’ll look like a class-act on the ground and in the air.

The recommended E-flite power system was designed around popular and economical 3S Li-Po batteries to provide great performance for scale maneuvers as well as picture perfect touch-n-gos.

Requires:
4+ channel transmitter
4+ channel receiver
(4) sub-micro servos, plus (2) sub-micro servos for optional flap operation
10-size brushless outrunner motor
40-amp brushless ESC
Propeller
Standard propeller hub or up to a 1.75"inch spinner
Flight battery
Charger for flight battery
Wingspan: 51.0 in (1300mm)
Overall Length: 36.3 in (920mm)
Wing Area: 451 sq. in. (29.1 sq. dm.)
Flying Weight: 46.4?48.0 oz (1300?1360 g)
Motor Size: 10-size brushless outrunner
Radio: 4+ channel radio system
Servos: (4) digital sub-micro servos required, (6) required for flap operation
Trim Scheme Colors: UltraCote True Red (U866), Black (U874)
CG (center of gravity): 2-3/16 to 2-3/4 in (55-70mm) back from the leading edge of wing
Prop Size: 10 x 5 - 12 x 6 thin electric propeller
Spinner Size: 1-3/4 in (45mm)
Speed Control : 40-amp brushless
Recommended Battery: 11.1V 3S 1800-2200mAh LiPo
Flaps: Optional
Retracts: No
Control Throw (Ailerons): Low: 11/32 in (9mm) up, 9/32 in (7mm) down, 15% expo; High: 15/32 in (12mm) up, 11/32 in (9mm) down, 25% expo
Control Throw (Elevator): Low: 1/2 in (13mm) up/down, 20% expo; High: 25/32 in (20mm) up/down, 30% expo
Control Throw (Rudder): Low: 11/16 in (17mm) right/left, 15% expo; 1 in (25mm) right/left, 25% expo
Control Throw (Flaps): Mid: 1/2 in (12mm); Full: 1 in (25mm)
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 10-15 Hours
Is Assembly Required: Yes

Review Summary