This is the Ofna Jammin' JP3 Off-Road Inline Tuned Pipe. For 1/8 scale off-road short track racing.

Ofna Jammin Pipe JP-5 CRT.5 will put the power into your .12 engine for your CRT.5 Mini Truggy. Designed with the same high performance specs as the larger pipes.

Ofna 807 Inline Polished Tuned Pipe.

Ofna optional Inline Tuned Pipe for use on the Nitro LD3 when utilizing a rear exhaust engine.

Ofna tuned pipe for use on the Hyper 8 RTR.

Ofna Sedan 6 ring tuned pipe.

Ofna dual chamber polished tuned pipe for use on Ofna vehicles.

Ofna round port manifold for 1/8th Scale Vehicles.

Ofna round port manifold for Ofna vehicles. This manifold allows the tuned pipe to be mounted to the proper location on the chassis.

Ofna 1/8th scale round port manifold for the Ultra GTP RTR.

Ofna manifold, this is the round port for the manifold. This manifold allows the tuned pipe to be mounted to the proper location on the chassis.

Ofna set of purple inline springs and seals.

Tuned Pipe Holder Post for the Ofna 9.5 buggy.

Ofna red 45 degree silicone exhaust coupler for 1/10 scale vehicles. This part connects a tuned pipe to the manifold.

Ofna yellow 45 degree silicone exhaust coupler for 1/10 scale vehicles. This part connects a tuned pipe to the manifold.

Ofna blue 45 degree silicone exhaust coupler for 1/10 scale vehicles. This part connects a tuned pipe to the manifold.

Ofna tuned pipe wire mount for the Hyper 7 buggy. This holds the front of the tuned pipe to the vehicle.

Ofna purple silicone exhaust coupler for 1/10 scale cars. This part connects a tuned pipe to the manifold.

Ofna Tuned Pipe Mount Kit.

Ofna silicone joint tube.

These are Replacement Round Port Exhaust Springs by Ofna

Ofna R port N.R12 blue exhaust seals.

Ofna pipe joint springs for the Jammin' CRT.5 Truggy.

Ofna pair of .15 silcone exhaust round port seals.

Ofna gasket for a .12 size engine side exhaust.