Fuji Imvac BT-24EI 24cc 1.5ci Gas Engine FJIBT-24EI
FJIBT-24EI Fuji Imvac BT-24EI 24cc 1.5ci Gas Engine

Fuji Imvac BT-24EI 24cc 1.5ci Gas Engine FJIBT-24EI

Add $99.00 to receive Free Shipping...click for eligibility
reg $549.99

Out of Stock.

This item qualifies for FREE SHIPPING

Fuji Imvac BT-24EI gasoline airplane engine. Electronic ignition offers full 30ยบ timing sweep for better idle and top end performance. Dual ball bearings on both the crankshaft and connecting rod. Easy straight-out throttle linkage. Compact muffler fits into cowlings easier Walbro carburetor features easy-to-use butterfly choke valve. THREE YEAR warranty.


2-cycle oil
Battery for ignition
Engine ON/OFF switch
Propeller: 16x8, 16x10 or 16x10 carbon prop

Displacement: 1.46 cid (24cc)
Practical RPM: 1,200-11,000 RPM
Output: 2.2 bhp @ 10,000 RPM
Weight: 3.20 lbs (1,453 g) with muffler
Weight: 2.95 lbs (1,342 g) without muffler
Fuel ratio, gas/oil mix: 100-150:1, (1:50:1 for break-in)
High Speed Needle Setting: Open ? turn from closed, ?? turn in Winter
Low Speed Needle Setting: Open 1/3/8 turn from closed, ?? turn in Winter) Note: It is not necessary to change needle settings if engine runs smoothly. Normally only the "H" needle will need adjustment from time to time and only a small amount.
On-Center Mounting Holes, Side to Side: 2.7" (70mm)
On-Center Mounting Holes, Top to Bottom: 3" (76mm)
Engine Height, Including Spark Plug: 6.5" (165mm)
Length from Muffler to Carb Opening: 5.75" (146mm)
Length from Mounting Plate to Magneto Rotor: 4" (102mm)
Length from Crankshaft to Magneto Rotor: 4.5" (114mm)

Review Summary