| DUE IN EARLY NOVEMBER 2007
The Futaba 12ZAP shares many features with the 14MZ such as Dual Internal Processors, Real-Time Response with 2048PCM, Fully Synthesized Receiver that operates in either Mode A (standard Mode) or Mode B (new Mode), Servo Grouping, Variable Dual Rates and Quad-Bearing Gimbals
Dial-N-Key jog dial with joy stick button allows cursor movement in four directions for very user friendly programming. PCM G3 2048 resolution is "backwards compatible" with 1024 PCM, and FM/PPM. Supports 13 different wing types, 3 tail types and 3 motor types. Supports eight flight conditions (seven plus the default). Stores memory for up to twenty-five models. 245 model memory available with optional 32MB Compact Flash Card available separately, six factory-set Variable Dual Rate (VDR) curves can be assigned to any function in any flight condition configuration. Variable Dual Rates (VDR) and Expo can be combined so they are automatically activated when a function is activated, no program mixing required. Dual Internal Processors allow one processor to be devoted to flying functions while the other processor focuses on non-flight functions such as input and communications. 7.4V 2200mAh Lithium Ion transmitter battery for long operating times.
R5114DPS Receiver;
Operates in either Mode A (standard Mode) or if flying a model that generates a lot of RF interference or if flying in an area where interference may occur Mode B (new Mode) may be selected by using state-of-the-art Ball Grid Array (BGA) layered PC board technology, the 12ZAPs R5114DPS 14-channel synthesized receiver is the world's smallest. All pilots will appreciate how easy its WFSS (Wireless Frequency Setting System) makes changing frequencies at busy airfields. It can be done right from the transmitter without changing crystals.
Servo Grouping;
Multiple servos controlling a single function can be set up through the transmitter and then plugged into differently adjustable receiver channels (even non-consecutively) without needing a separate servo synchronizer for mixing. Quad-Bearing Gimbals for smoothest motion and response, stick tension and detent are adjustable. Seven color LED indicator.
12ZAP Synthesized Transmitter (not available separately), 72MHz MZ-FM Module (only available through Futaba Service Center), R5114DPS 72MHz Receiver, FLT2F2200 7.4V 2200mAh Lithium Ion Transmitter Battery, LBC-1D5 Lithium Ion Transmitter Battery Charger, NR4F NiCd 1500mAh Receiver Battery, FBC-32B Wall Charger for Receiver Battery, DSC Cable, Switch Harness with Charge Cord, Padded Aluminum Case with two Keys (not available separately). Woven Orange Neck Strap. One each 1.5mm and 2.5mm Hex Wrenches and Instruction Manual are all included with this product. |
