| The Futaba 12FGA shares many features with the 14MZ such as Dual Internal Processors, Real-Time Response with 2048PCM, Fully Synthesized Receiver that operates in either Mode A (standard Mode) or Mode B (new Mode), Servo Grouping, Variable Dual Rates and Quad-Bearing Gimbals
Newly designed Dial-N-Key jog dial with joy stick button allows cursor movement in four directions for very user friendly navigating through menus and programming. PCM G3 2048 resolution is "backwards compatible" with 1024 PCM, and FM/PPM. 7 different wing types, 3 tail types, and 8 heli swash types are already programmed into the 12FG. 6 types of no tail wing (winglet) in each airplane and glider. Supports eight flight conditions (seven plus the default). Stores memory for up to thirty models. 1882 model memory available with optional 1GB SD Card available separately, Six factory-set Variable Dual Rate (VDR) curves can be assigned to any function in any flight condition configuration. Variable Dual Rates (VDR) and Expo can be combined so they are automatically activated when a function is activated, no program mixing required. Dual Internal Processors allow one processor to be devoted to flying functions while the other processor focuses on non-flight functions such as input and communications. 7.2V 1700mAh NiMH transmitter battery. R5114DPS Receiver; operates in either Mode A (standard Mode) or if flying a model that generates a lot of RF interference or if flying in an area where interference may occur Mode B (new Mode) may be selected. By using state-of-the-art Ball Grid Array (BGA) layered PC board technology, this 14-channel synthesized receiver is the world's smallest. All pilots will appreciate how easy its WFSS (Wireless Frequency Setting System) makes changing frequencies at busy airfields. It can be done right from the transmitter without changing crystals. Servo Grouping; multiple servos controlling a single function can be set up through the transmitter and then plugged into differently adjustable receiver channels (even non-consecutively) without needing a separate servo synchronizer for mixing. Each servo's EPA can be adjusted individually from the transmitter-no separate servo synchronizer requires for mixing. Quad-Bearing Gimbals for smoothest motion and response, stick tension and detent are adjustable. 255x163 LCD screen with adjustable contrast. Front mounted slider switches for easier access. Seven color LED indicator.
12FGA Synthesized Transmitter (not available separately), 72MHz Module, R5114DPS 72MHz Receiver, 7.2V 1700mAh NiMH Transmitter Battery, Battery Charger, NiCd 1500mAh 4.8V Receiver Battery, Heavy Duty Switch Harness, Woven Orange Neck Strap, and Instruction Manual are all included with this product. |
