Futaba 2ER has a stylish new case - the result of Bioengineering Design, with the look and feel young modelers demand. Fine trims that are easily accessible on the front face panel for convenience. Short sticks that allow for full range of movement by smaller hands. Servo Reversing and Surface Mount Technology (SMT). Servo reversing switches on upper face of transmitter. Includes two S3003 servos and a R122JE BEC receiver. Rear battery access (battery door is located on the back of radio). Crystal holder is located on the lower face of transmitter. Battery status display. Green LED (batteries OK), Red LED (blinking, replace batteries).

72MHz models are used primarily with airplanes. 75MHz models are used with BEC electric cars and boats. Box: 72MHz models include a battery box that is attached to the switch harness and has a "J" type connector. 75MHz models have a battery 75MHz models have a battery box that is detachable from the switch harness using a BEC plug and plugs into the receiver with a red BEC type plug. The Box/Switch for the 72MHz is not available separately. The servo mounting hardware such as the rubber grommets, brass eyelets, and servo mounting screws are not included.

One Transmitter
One Transmitter Antenna
One R122JE BEC Receiver
One Crystal Set
Two S3003 Servos w/servo horn
Four AA Cell Battery Box w/Switch Harness
One Frequency Flags/Number Set
One Instruction Booklet
Ratchet Screw are all included.

12 "AA" batteries for 72MHz models, 8 "AA" batteries for the 75MHz models.