| Unprecedented digital frequency synthesizing! Looking for easy, crystal-free frequency changing plus the glitch-preventing power of digital synthesizing? Then you're looking for the Futaba 3PM-FS Pro.
With the 3PM-FS Pro, you'll eliminate trackside frequency conflicts– choose from 30 different channels quickly and easily. And no matter what type of vehicle you race — or where you race it — you'll enjoy 100% reliable control. Even during brutal off-road nitro action, the 3PM-FS Pro keeps you in complete command...as only a digital system can.
Though moderately priced, the 3PM-FS Pro gives you another competitive edge usually limited to elite, high-end radios: the choice of using FM or blazing-fast HRS (High Response Speed) transmission modes. The receiver will automatically detect which mode you select. Choose HRS and you'll have the extra protection of fail-safe! This radio is sold without servos and REQUIRES DIGITAL SERVOS ONLY and 6V when using an HRS receiver. Non-digital servos are fine on PPM/FM. For optional NiCd pack use either FUTM1463 or FUTM1440. If you would like to use optional NiCds with your transmitter, we recommend an assembled pack, not individual cells. If individual NiCd cells are used the battery tray could be damaged during charging.
Digital synthesizing makes the 3PM-FS Pro much less susceptible to glitches caused by vibration than analog synthesizing. Besides typically precise FM mode, the 3PM-FS Pro can also transmit in High Response Speed (HRS) mode. When used with digital servos, racers will enjoy response that's THREE TIMES FASTER than FM!
Auto-Detection
The R303FHS receiver also instantly detects whether the transmitter is in HRS or FM mode.
Fail Safe
A big plus for nitro racers, Fail Safe (on HRS mode only) automatically returns servos to a neutral or preset position in the event of interference or a malfunction.
Steering Speed
Reduces the speed of the steering servo incrementally in relation to the speed at which you turn the transmitter wheel.
ABS (Anti-Lock Brake System)
ABS pulses the brakes to prevent wheel stop or lockup and maintain steering control, especially in corners.
Throttle Acceleration
Electronically speeds up the throttle servo to reduce gas/brake lag times in the linkages.
Brake Mixing
Programs dual brake servos and controls brake bias in larger scale models like 1/4 and 1/5th scales.
Programmable Mixing
Allows proportional mixing on the third channel with steering/throttle functions. Programmable mixing is ideally used for four-wheel steering or altering a boat's engine thrust angle.
Channel 3
Allows you to switch locations and the amount of servo throw.
Timer
Count up/down or use to record up to 100 laps.
The R303FHS synthesized receiver (FUTL7620) features Auto Detection, which automatically indicates whether the transmitter is in Hi-Response or FM mode when it is turned on. It's also a great upgrade for any Futaba FM radio!
Because the radio is synthesized, there's no hassling with crystals. Frequencies are selected right from the transmitter, resolving conflicts on the spot.
Modelers also get all this with the 3PM-FS Pro:
10-model memory
Easy programming
Programmable mixing
Programmable switches and buttons
Digital steering and throttle trims
Steering dual rates
Steering/Throttle exponential
ABS braking
Steering speed
Brake mixing
Steering, brake/throttle and 3rd channel End Point Adjustment
Charge jack for optional transmitter NiCds |
