Futaba MPDX-1 Multi-Proportional 8Ch Decoder FUTM4158
FUTM4158 Futaba MPDX-1 Multi-Proportional Decoder 8-Channel

Futaba MPDX-1 Multi-Proportional 8Ch Decoder FUTM4158

Add $99.00 to receive Free Shipping...click for eligibility
reg $99.99
$84.99

Ships today! Order before 4PM MST

This item qualifies for FREE SHIPPING

Plug the MPDX-1 into one channel of any PCM G3, PCM 1024 or FM receiver, and get eight in return that's SEVEN MORE channels that pilot can use any way he wishes. Unlike other channel expanders, all seven of the channels added with Futaba's MPDX-1 unit are fully proportional, switch-selectable and all feature endpoint adjustment (ATV) and fail-safe! Very easy to set up; comes preset for PCM 2048 resolution.
Also works well with Futaba's R148DP and R149DP receivers; or use two MPDX-1 units with an R5014DPS and gain 14 proportional channels!
An inexpensive way to get the channel capabilities of second radio!
Note that this unit will only work with the 14MZ and FX40.

The MPDX-1 connects to the receiver output of 14MHz or FX-40 System and expands the signal of one channel to channels. Servo operation of channels is possible with channel. Linear operation. Servo operation speed of each channel can be set. Fail-Safe for each channel can be set.
14MZ/FX40 can accommodate up to multi-proportional decoders. Channel expansion up to 28 channels is possible with the R5014DPS receiver.
Operating control setting, direction of operation change, and travel adjustments are possible for each multi-prop expanded channel.


Requires:

A 4.8V or 6.0V battery and switch.

Dimensions: 29.6x39.3x15.8mm
Weight:
14.2g
Operation power requirement:
4.8 or 6.0V (4~5 NiCad batteries)
Current drain:
7.5mA
Number of multi-prop output channels:
8
Applicable modulation modes:
PCM G3, PCM1024, PPM
Multiplexing scheme:
Pulse width division (PCM G3, PCM1024), time division (PPM)
Delay function:
Programmable for each channel
Fail-safe function:
F/S function/HOLD function can be selected for each channel

Review Summary