Great Planes Cosmic Wind Sport Flier/Racer EP ARF Red GPMA1810

Add $99.00 to receive Free for eligibility
reg $169.99

Out of Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Great Planes ElectriFly Cosmic Wind Sport Flier/Racer EP ARF Airplane in Red. The Cosmic Wind is a great choice for club racing or for just chasing another Cosmic Wind at any flying site.

The single engine, single seat Cosmic Wind racing monoplane was designed in 1947, with Goodyear Trophy victories in mind. This Great Planes ElectriFly model version excels at sport aerobatics using low-cost brushless power components.

One Great Planes ElectriFly Cosmic Wind Sport Flier/Racer EP ARF Airplane with Spinner, Landing Gear, Wheels, Prop Adapter, Decal Sheet, Hardware and an Instruction Manual

Radio: Four channel
Servos: Three micro, high-torque
Servo Extension: One 9"
ESC: 35A brushless
Motor: ElectriFly RimFire .10 Brushless Outrunner recommended,
Propeller: APC 8x8E recommended if using motor listed above
Battery: At least 1500mAh 11.1V 25C LiPo
Battery Charger: LiPo compatible
Building and field equipment
  • Painted fiberglass fuselage
  • One-piece balsa and ply wing
  • Single servo aileron control
  • Top Flite MonoKote covering
  • Two-piece aluminum landing gear
  • Painted fiberglass wheels pants
  • Foam wheels, main, 1.77" (45mm) foam, tailwheel 0.78" (20mm)
  • Single, clear canopy
  • Red plastic spinner, 1.75" (44.4mm)
  • Warranty (through the manufacturer): Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.
Length: 36" (915mm)
Wing Area: 254 sq in (16.4 sq dm)
Weight: 27.5-29.5oz (780-835g)
Wing Loading: 15.6-16.7oz/sq ft (48-51g/sq dm)
Length: 32" (815mm)
Airfoil: Semi-symmetrical
Configuration: Low wing
Center of Gravity, (CG): 2-1/16" (52mm) back from the leading edge of the wing at the fuselage side

Control Throws
Low Rate
Elevator up & down:
1/8" (3mm) 4 degrees
Rudder right & left: 3/8" (10mm) 10 degrees
Ailerons up & down: 1/8" (3mm) 7 degrees

High Rate
Elevator up & down:
1/4" (6mm) 8 degrees
Rudder right & left: 9/16" (14mm) 14 degrees
Ailerons up & down: 3/16" (5mm) 11 degrees

Review Summary