Great Planes Goldberg Falcon EP ARF GPMA1940
GPMA1940 Great Planes Goldberg Falcon EP ARF

Please Note: Color and/or graphics may differ from image shown

Great Planes Goldberg Falcon EP ARF GPMA1940

Add $99.00 to receive Free for eligibility
reg $89.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Great Planes Goldberg Falcon EP ARF Trainer Airplane.


  • Made of Pro-Formance foam
  • One-piece wing with wing doubler that allows outdoor flying on calm days
  • Single servo aileron control
  • Radio compartment is made of plywood and is easily accessible under wing
  • Single, clear canopy
  • Prebent wire, tricycle type landing gear
  • Three foam wheels, 1.5" (38mm) diameter
  • Wooden firewall motor mount
  • Warranty (through the manufacturer): Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at date of purchase. This warranty does not cover any component parts damaged by use or modification.

One Great Planes Goldberg Falcon EP ARF Trainer Airplane with Pre-built wings, fuselage and tail assemblies, pushrods, landing gear three wheels, motor mount, decals and illustrated instruction manual

Radio: At least 4 channel
Servos: Three micro
Motor: Outrunner brushless, Rimfire 250, GPMG4502 recommended
ESC: Great Planes ElectriFly SS-8 8 Amp Brushless ESC if using motor
listed above
Battery: 7.4V 300mAh LiPo (GPMP0700)
Propeller: 8x3.8 (APCQ5000)  
Wingspan: 37" (940mm)
Wing Area: 286 sq in (18.4 sq dm)
Wing Loading: 4.3 - 5 oz/sq ft (13-15 g/sq dm)
Length: 30" (760mm)
Weight: 8.5 - 10oz (240 - 285g)
Center of Gravity (CG): Place fingers on middle lines on bottom of wing and and mark recommended starting balance point, CG can be shifted 3/8" (10mm) forward or backward to change the flying characteristics

Control Throws
Low Rate
Elevator Up:
1/2" (13mm) 13 degrees
Elevator Down: 3/8" (10mm) 14 degrees
Rudder: 1" (25mm) 23 degrees
Ailerons Up: 3/8" (10mm) 17 degrees
Ailerons Down: 1/4" (6mm)  12 degrees

High Rate
Elevator Up:
3/4" (19mm) 28 degrees
Elevator Down: 5/8" (16mm) 23 degrees
Rudder: 1-1/2" (38mm) 35 degrees
Ailerons Up: 1/2" (13mm) 24 degrees
Ailerons Down: 3/8" (10mm) 17 degrees

Review Summary