HPI Nitro RS4 3 1/10 4WD RTR Drift Car Mustang HPI112619

Add $99.00 to receive Free Shipping...click for eligibility
reg $589.00

In Stock. Usually ships within 24 hours.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the HPI Nitro RS4 3 Evo+ 1/10 scale Glow Powered Drift Car, with the 1969 Ford Mustang Body included.

World Champion Drifter Vaughn Gittin Jr. and the Need for Speed crew joined forces to build this fully-functional, one-of-a-kind Street, Track and Drift machine. This is the official, authorized RC nitro replica, powered by HPI Nitro muscle! While Vaughn will be the only one thrashing the full-size car, the entire world can now enjoy driving the HPI Nitro 1/10 scale version: The Nitro RS4 3 Evo+! With the 1969 Mustang RTR-X body on our super-popular Nitro on-road platform, you'll have a combination that'll inspire smoke-churning, tire-burning fun for speed wherever you go!

One HPI Nitro RS4 3 Evo+ 1/10 scale Glow Powered Drift Car with oil-filled shocks, tuned pipe, 3.0cc engine, trimmed and painted polycarbonate body, tires, foam inserts, wheels, decals, 2.4GHz 3-ch radio, 8 AA batteries, instructions, glow plug

Building and track equipment
Fuel: 2-stroke glow fuel with 10%-20% nitromethane, 16% lubricant
  • Drive: Four wheel shaft drive
  • ABC cylinder and liner construction-"A"luminum piston,"B"rass cylinder liner that is "C"hrome plated, lightweight aluminum con rod, 2 needle 6.5mm rotary carburetor, 2 stage air filter
  • Radio: TF-40 2.4GHz 3-channel with steering and throttle trims, dual rate for steering and charge jack for optional NiCd battery
  • Radio Box: Sealed, and removable for easy chassis cleaning
  • Clutch: 2-shoe
  • Ball Bearings: 18 rubber sealed
  • Main Gear: 47 and 43 tooth composite construction main gears
  • Gearbox: Sealed, front and rear
  • Brake: Single disc, fiber construction
  • Wheels: 5-spoke Workmeister S1
  • Tires: D compound X-pattern 1.02" (26mm) wide, 2.5" (65mm) diameter
  • Bumper: Front foam
  • Adjustable caster/toe-in and camber
  • Servo Saver: Included
  • Steering: Bellcrank
  • Chassis: 0.098" (2.5mm) 6061 aluminum, gray in color
  • Engine: Nitro Star T3.0 3.0cc (.18 cu in) 2.2hp with pull starter
  • Exhaust: Dual chamber aluminum tuned pipe, black in color
  • Servos: Two standard size and torque, waterproof
  • Fuel Tank: 2.53oz (75cc), flip top cap
  • Transmission: Two-speed, adjustable
  • Shocks: Four oil-filled, with coil-over spring
  • Clutch bell: 22 teeth and 18 teeth gears that thread onto clutch bell
  • Differentials: Sealed, with metal bevel gears, limited slip front differential
  • Body: Pre-painted and trimmed with rear wing and decals applied, and extra clear wing
  • Suspension: Four wheel independent double wishbone
Length: 17.1" (434mm)
Width: 7.9" (200mm)
Height: 4" (102mm)
Weight: 3.85lbs (1745g) approximate
Wheelbase: 10.1" (256mm) (wheels on-center front-to-rear)
Tread: Front: 6.75" (171mm) Rear: 7" (178mm) (wheels on-center side to-side)
Front Track: 7.25" (184mm)
Rear Track: 7.75" (197mm)
Ground Clearance: 0.29" (7.5mm)
  • HPI Nitro RS4 3 EVO+

Review Summary


5 Stars awesomeness

aidan from NY wrote (August 14, 2014):

I love mustangs!!!!!!!!!!!!!!!!!!!!!!!!!