HPI Nitro RS4 3 Drift 1/10 Nissan S-13 RTR HPI112587

Add $99.00 to receive Free Shipping...click for eligibility
reg $589.00
$329.97

In Stock. Usually ships within 24 hours.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the HPI Nitro RS4 3 Evo+ 1/10 RTR with the Nissan S13 Body.

Dai Yoshihara's Discount Tire/ Falken Tire Nissan S13 is now available in HPI NITRO form! Dai's iconic Yoshihara Champion wheels and Nissan S13 body have impressed drift fans around the world; now they’re fitted onto the HPI Nitro 3 Drift chassis for out-of-this-world drift action!

What lies beneath the red and white replica Discount Tire/ Falken Tire Nissan S13 is a purpose built custom-designed drift chassis that’s powered by a real, fuel-burning car engine! The included HPI Nitro Star G3.0 engine is a nitromethane powered, high-revving engine that blows exhaust smoke out the rear of the car, just like the real S13!

A durable 4WD shaft drivetrain gets the power down to replica Falken Azenis RT-615K tires, which are wrapped around officially licensed Dai Yoshihara wheels, allowing you to easily maneuver the car around drift courses. Just like Dai's car, the HPI Nitro 3 Drift comnes equipped with a stiff racing chassis, coil over shocks, double-wishbone suspension and enough tuning potential to get you on the winner's podium!

Includes:

One HPI Nitro RS4 3 Evo+ 1/10 RTR with a Painted and Trimmed Nissan S13 Body, Oil-Filled Shocks, Tuned Pipe, 3.0cc Engine, D Compound X-Pattern Tires, Foam Inserts, Wheels, Decals, TF-40 2.4GHz 3-Channel Radio, 8 AA Batteries, Instructions, and a Glow Plug

Requires:
Building and track equipment
Fuel: 2-stroke glow fuel with 10%-20% nitromethane, 16% lubricant

Features:

  • Four wheel shaft drive
  • ABC cylinder and liner construction-"A"luminum piston,"B"rass cylinder liner that is "C"hrome plated, lightweight aluminum con rod, 2 needle 6.5mm rotary carburetor, 2 stage air filter
  • TF-40 2.4GHz 3-channel radio with steering and throttle trims, dual rate for steering and charge jack for optional NiCd battery
  • Sealed and removable radio box, for easy chassis cleaning
  • 2.53oz (75cc) Fuel Tank with flip top cap
  • Two-speed, adjustable transmission
  • Four oil-filled shocks with coil-over spring
  • 47 and 43 tooth composite main gears
  • Sealed front and rear gearbox
  • Single brake disc, fiber construction
  • Pre-painted and trimmed body with rear wing and decals applied, and extra clear wing
  • Four wheel independent double wishbone suspension
  • Bellcrank steering
  • Aluminum gray chassis, 0.098" (2.5mm) 6061
  • Nitro Star T3.0 3.0cc (.18 cu in) 2.2hp engine with pull starter
  • Dual chamber aluminum tuned exhaust pipe, black in color
  • Two standard size and torque servos, waterproof
  • 2-shoe clutch
  • 18 rubber sealed ball bearings
  • 22 teeth and 18 teeth clutch bell gears that thread onto clutch bell
  • Sealed differentials, with metal bevel gears, limited slip front differential
  • D compound X-pattern tires, 1.02" (26mm) wide, 2.5" (65mm) diameter
  • Front foam bumper
  • Adjustable caster/toe-in and camber
  • Servo Saver included
Vehicle
Length:
17.1" (434mm)
Width: 7.9" (200mm)
Height: 4" (102mm)
Weight: 3.85lbs (1745g) approximate
Wheelbase: 10.1" (256mm) (wheels on-center front-to-rear)
Tread: Front-6.75" (171mm) Rear-7" (178mm) (wheels on-center side to-side)
Front Track: 7.25" (184mm)
Rear Track: 7.75" (197mm)
Ground Clearance: 0.29" (7.5mm)
  • HPI Nitro RS4 3

Review Summary