HPI Sprint 2 Flux 2010 Camaro Body RTR HPI108765

Add $99.00 to receive Free Shipping...click for eligibility
reg $539.00

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the HPI Sprint 2 Flux 1/10 Scale 4WD On-Road Touring Car RTR with a 2010 Camaro Body.

One HPI Sprint 2 Flux 1/10 Scale 4WD On-Road Touring Car RTR with the 2010 Camaro Body, Flux Vapor ESC, Flux Vektor 5900kV brushless motor, body, wing, 4 AA TX batteries, 2.4GHz radio w/waterproof steering servo, decal sheet, and an instruction manual


Battery: 7.2V NiMH stick pack with Dean's connector
Battery Charger: To match selected battery
Misc. Items: Building and track equipment
  • Plastic chassis, 3/16" (4mm)
  • Four wheel belt drive
  • 3-channel HPI TF-11 2.4GHz with steering and throttle trim, servo reversing, low battery indicator and 3-channel receiver with failsafe, SF-10W waterproof steering servo and four AA transmitter batteries
  • Full set of rubber sealed ball bearings
  • Planetary gear, sealed differentials
  • HPI X-Pattern Racing Tires, 1.02" (26mm) width, 1.9 (49mm) diameter; Rear, 1.2" (31mm) width, 1.9" (48mm) diameter
  • Steel 48 pitch pinion gear
  • 48 pitch, composite spur gear
  • Front foam bumpers
  • Adjustable Ackerman, Caster, and Camber
  • HPI Flux Vektor 5900kV brushless motor (not 3S LiPo compatible)
  • Waterproof HPI Flux Vapor ESC, LiPo compatible and fully programmable with the USB Programming Kit (not included, order HPI100573)
  • Oil-filled, plastic bodied shocks
  • Single speed transmission with Flux optimized gearing
  • HPI TE37 six spoke black 1.9" (48mm) diameter, 1.02" (26mm) wide
  • Polycarbonate painted and trimmed body, with trim and light details and clear plastic windows, matte black finish rear wing
  • Fully adjustable suspension, extra long upper links with new multiple mounting positions, and adjustable droop
  • Bearing supported bell-crank type steering with servo saver
17" (431mm)
Width: 7.5" (190mm)
Height: 5" (127mm)
Weight: 2.7lbs (1245g)
Wheelbase: 10.1" (257mm)
Front Track: 7.4" (187mm)
Rear Track: 7.7" (196mm) side to side at outer edges of wheel
Front Tread: 6.3" (160mm)
Rear Tread: 6.6" (169mm) side-to-side at wheel centers
Ground Clearance: 0.35" (9mm)

17.1" (434mm)
Width: 7.75" (197mm) at rear wheels (widest point)
Width: 6.6" (169mm) behind from wheels (thinnest point)
Height: 4.4" (111mm)

Review Summary