| Additional Technical Info Will Be Added When It Becomes Available.** FEATURES: High quality precision gimbals with stick length and tension ATV (Adjustable Travel Volume) on Channels 1 and 2. ATV limits or extends the maximum throw of a servo Channels 2 and 4 V-Tail mixing option Trainer system-trainer cord not included, Five LED battery indicators with low battery alarm Two year warranty INCLUDES: One Hitec Laser 4 Four Channel Radio Control System with, Two HS-55 Micro Servos, One 12" (305mm) Servo Extension, One Micro 05S Five Channel Receiver One 9.6V 600mA Transmitter NiCd, One CG-25A 110V Wall Charger, One ON/OFF switch harness, One receiver crystal and one transmitter crystal (contact Hitec for transmitter crystal) One Flight Preserver foam receiver wrap One frequency flag set Two servo mounting hardware kits One antenna mount screwdriver Illustrated instruction manual REQUIRES: Installing components into model and charging batteries. SPECS: Transmitter, Operating System: Two stick, four channel Modulation: FM Power Requirement: 9.6V Nicad Micro 05S Receiver, Type: 5 channel, dual conversion 72MHz FM/PPM Power Requirement: 4.8V Nicad Length: Width: Height: Weight: HS-55 Servos, Speed: 0.17 Sec at 60 degrees Output Torque: 15.27 oz/in (1.1 kg/cm) Weight: 0.27 oz (7.8 g) Length: 0.89" (22.8mm) Width: 0.45" (11.6mm) Height: 0.94" (24mm) COMMENTS: Differences between the Laser 4 and the Laser 6 Channel models: Laser 4 Laser 6 5 LED Battery Indicators Battery Meter ATV Channels 1 & 2 Dual Rates Channels 1 & 2 ATV on Channel 4 End Point Adjustment on Channel 3 |
