Hitec Skyscout H2Go ARF HRC13209
HRC13209 Hitec Skyscout H2Go

Please Note: Color and/or graphics may differ from image shown

Hitec Skyscout H2Go ARF HRC13209

Add $99.00 to receive Free Shipping...click for eligibility
reg $439.95
$162.99

Ships today! Order before 4PM MST

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the new Hitec Skyscout H2Go ARF Airplane.

Features:
  • Made of Elapor foam
  • Two piece wing design with composite wing joiner and optional ailerons
  • C2812-1100 brushless outrunner motor
  • Hitec Minima 6S 2.4GHz Receiver
  • Two installed HS-55 servos for rudder and elevator control
  • HBE-18A ESC
  • Two-piece folding propeller design, black in color
  • Building time is approximately two hours

Combining the durability of a Multiplex pre-assembled airframe with the precision of Hitec electronics, the SkyScout is the perfect airplane for both beginner and experienced pilots. It features a protected top mounted powerful outrunner motor along with rudder and elevator controls and optional ailerons. With gentle gliding characteristics and easy-to-transport design, the SkyScout will soon become your favorite spunky flyer.

The SkyScout is available in three unique and convenient packages as well as a kit version. The R2GO comes "Ready to Go" with everything you need including a Hitec Lite 4-channel radio. The H2GO is the "Hitec to Go" version which is installed with all the necessary electronics and just requires a Hitec transmitter to link up and go. The P2GO package is pre-installed with the servos, motor and speed control and needs only the receiver, transmitter and motor battery to plug in and go. A kit version is also available, so pick your favorite and take to the blue skies with your very own Hitec SkyScout.

Includes:
One Sky Scout Airplane with a Minima 6S 2.4GHz Receiver, two sub micro Servos, C2812-1100 Brushless Outrunner Motor, HBE-18A ESC, and Instructions

Requires:

Battery: 11.1V 3-cell LiPo 1300-2200mAh, with at least a 15C discharge rating
Battery Charger: Compatible with selected battery
Transmitter: At least 4-channel compatible with included Hitec receiver
Maintenance and field equipment

Length: (977mm)
Wingspan: (1366mm)
Wing Loading: 25 g/sq dm
Wing Area: 28 sq dm
Center of Gravity (CG): Approximately 3.3" (85mm) aft of the wing root leading edge on either side of the fuselage
Control Throws-
Elevator: Up, 0.197" (5mm) Down, 0.157" (4mm)
Rudder: Right to Left, 0.393" (10mm)
Ailerons: Up, 0.315" (8mm) Down, 0.157" (4mm)

Note:
This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer.

Review Summary