 |
 |
 |
 |
This is the 1/10 scale electric powered, radio controlled, Hot Bodies Cyclone S On-Road Sport Touring Car Kit.
FEATURES: Chassis: Composite nylon tub 0.12" (3mm) thick, with composite nylon upper and middle deck, bulkheads, pivot blocks and shock towers Drive: Four wheel belt drive Ball bearings: full set Shocks: Four oil filled, plastic bodies Gearbox: Open front and rear Differentials: Ball type Motor Mount: Aluminum Bumper: Front foam Suspension: Adjustable Tires: Slick 2.5" (63mm) diameter, 1" (26mm) wide Wheels: White dish 2" (51mm) diameter, 1" (26mm) wide Camber Tie Rods: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle Caster: Adjustable front and rear, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis, carbon plastic caster blocks Ackerman: Adjustable, Ackerman describes the effect of the inside front wheel turning tighter than the outside front wheel Roll Center, Ride Height and Down Stops: Adjustable front and rear Bump Steer, Anti-Dive/Kick-Up: Adjustable Steering: Ball bearing supported, single bellcrank Servo Saver: Spring loaded, incorporated into steering bellcrank Warranty: Two year limited, valid only in the US, Canada and South America
INCLUDES: Hot Bodies Cyclone S Touring Car Kit with four oil-filled shocks, 96 tooth, 64 pitch spur gear, ball bearings, front foam bumper and illustrated instruction manual |
|
 |
 |
|
 |
 |
 |
 |
 |
Required Parts
REQUIRES: Radio: 2-Channel with 1 Servo
Radio Batteries: (8) AA size
Speed Control: Electronic
Motor: 540 size
Body: 190mm touring car, HBSC6811, HBSC6812 or equivalent
Battery: 6 cell stick pack
Charger: AC/DC timed or peak for battery
Paint: Spray or brush-on For polycarbonate body
Misc. Items: Building and track equipment
|
|
 |
 |
 |
 |
|
 |

|
These might interest you...
|
|
|
|
|