| Hot Bodies off road buggy features: Chassis: 7075 Aluminum 0.12" (3mm) thick, gun metal gray in color with carbon fiber servo and brake decks. Drive: Four wheel, shaft driven. Exhaust: Tuned pipe with header. Fuel Tank: Plastic with flip top cap, splash guard and overflow drain. Clutch: Three shoe, 13 tooth metal clutch bell and purple aluminum flywheel. Transmission: Single-speed. Ball Bearings: Used throughout except servo saver where bushings are used. Shocks: Four aluminum bodied, oil filled with coil-over springs, plastic shock spacers, and 3.5mm hardened shock shafts. 7075 (T6) 4mm thick front and rear shock towers (purple anodized). Main Gear: Metal, 46 tooth. Gearbox: Sealed front and rear. Differentials: Bevel geared (hardened). Brake: Dual disk on the front and single disk on the rear. Tires: 1.6" (41mm) wide, 3" (76mm) inner diameter, 4.75" (121mm) outer diameter knobby tread rubber with foam inserts pre-glued to wheels. Wheels: dish plastic 1.6" (41mm) wide, 3" (76mm) diameter. Body: Clear polycarbonate plastic buggy with rear wing. Bumpers: Black plastic partial front bumper. Suspension: Front and rear hardened plastic arms with carbon steel inner hinge pins. Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis. Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle. Steering: Bell-crank type. Servo Saver: Included. This product includes, one Hot Bodies Lightning 2 Pro Evo 1/8 scale buggy with oil-filled aluminum bodied shocks, clear body with wing, air filter, 46 tooth main gear, tuned pipe, manifold with spring, fuel tubing, antenna tube, decal sheet, 4 way wrench, 13 tooth clutch bell, and illustrated instructions manual. |
