FEATURES: Chassis: 1/8" (3mm) thick, 7075-T6 grade aluminum, long wheelbase, rear chassis brace mount Carbon Fiber: Radio Tray and Center Brace Shock Towers: 3/16" (4mm) thick, 7075-T6 grade aluminum Drive: Four wheel shaft drive Spiral Bevel Gears: 43T ring and 10T pinion CVA Joints: Front, front and rear center Suspension Holder: Front and rear CNC suspension holder Transmission: Single speed Ball Bearings: Full set, rubber sealed Clutch: 3 shoe racing type Shocks: Four oil-filled, with coil-over soft, medium and hard springs, 3.5mm shafts, long stroke and protective shock shaft boots Sway Bars: Front and rear Main Gear: Steel 50 tooth Gearbox: Sealed front and rear Differentials: Hardened steel gears Brakes: Triple disc (two in the front and one in the rear) Tires: Hot Bodies soft compound with series of square block patterns Wheels: One-piece, yellow dish Body: Low profile clear stadium truck with high down force wing Bumpers: Plastic front and rear Suspension: Super long aluminum front and rear suspension arms with roost deflectors on each front hub carrier to keep the out-drives in good condition and dirt shields on rear hub carriers to keep dirt from internal part of axles Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle Steering: Lay down steering servo mount Servo Saver: Included, integrated into the right bellcrank Wing: Tough nylon construction Exhaust: Tuned Pipe and Manifold

INCLUDES: One Hot Bodies Lightning Stadium Pro-R with four shocks, clear body with wing, carbon fiber radio tray and center brace, yellow dish wheels, square pattern tires, 7056-T6 aluminum chassis and shock towers, clutch, air filter, header, tuned pipe, hardware package, photo-illustrated manual and decal sheet

REQUIRES: Radio: 2 channel Engine: .21-.30 class rear exhaust engine Fuel: Car blend with 20% nitro content Fuel bottle Glow plug igniter Engine starter Cross wrench Lexan body paint

SPECS: Vehicle- Length: 20.7" (526mm) Width: 16.4" (416mm) Height: 7.0" (178mm) Weight: 9.39lbs (4260g) approx. Wheelbase: 14.5" (368mm) wheels on-center front-to-rear Tread: 13-1/4" (336mm) wheels on center side-to-side Front Track: 16-1/4" (412mm) Rear Track: 16-1/4" (412mm) Ground Clearance: 1-1/2" (38mm) Tires- Front: 2.9" x 5.7" (74x144mm) Rear: 2.9" x 5.7" (74x144mm) Body- Length:17-5/8" (447mm) Width: 7" (177mm) around pipe flare (widest point) 6-1/2" (164mm) behind from wheels (thinnest point) Height: 5" (127mm)

COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. (16) 8 X 16 mm Differential, wheels and hubs,  ( 2) 5 X 10 mm Clutch bell,  ( 4) 6 X 10 mm Option for the bellcrank,  ( 2) 5 X 8 mm Option for the brake cam.