Integy SPECS Brushless, 2S-4S 80A ESC for E-Maxx, E-Revo & 1/8 Off-Road
INTE2083 Integy SPECS Sensorless 2S-4S 80A ESC E-Maxx/E-Revo

Integy SPECS Brushless, 2S-4S 80A ESC for E-Maxx, E-Revo & 1/8 Off-Road

Add $99.00 to receive Free Shipping...click for eligibility
reg $89.99
$74.99

Out of Stock.

This item qualifies for FREE SHIPPING
This is the Integy SPECS Sensorless 2S-4S 80A ESC for the Traxxas E-Maxx and E-Revo. When you're ready to step up to LiPo power and Brushless for your Traxxas E-Maxx, E-Revo, or other 1/8-scale buggy or truggy, start off with a SPECS S8A-RTR ESC.

Features:
  • Designed for LiPo only, from 2S to 4S
  • Multiple user-selectable settings like running mode, drag brake force, start control (punch), and braking force
  • Built-in voltage cut-off is user selectable based on number of battery cells being used
  • One-button radio setup will have you driving in no time
  • Maximum output of 80-amps and an input voltage range from 7.4v up to 14.8v
  • Large 4mm gold bullet plugs are pre-installed
  • For the Traxxas E-Maxx and E-Revo

The Integy S8A-RTR is designed for LiPo only, from 2S to 4S. You can tailor the ESC to match your running conditions and vehicle by way of multiple user-selectable settings like drag brake force, running mode, start control (punch), and braking force. The built-in voltage cut-off is also user selectable based on how many battery cells you are using. One-button radio setup will have you driving in no time.

The S8A-RTR ESC has an input voltage range from 7.4v up to 14.8v and a maximum output of 80-amps. That means you can run a 4S LiPo for racing and speed runs, a 3S LiPo for more punch, or a 2S LiPo for backyard fun.  The large cooling heatsink gets added airflow thanks to a built-in cooling fan. The cooling fan itself is protected from damage by the ESC’s vented case. Large 4mm gold bullet plugs are pre-installed.

Includes:
One Integy SPECS Sensorless 2S-4S 80A ESC for the Traxxas E-Maxx and E-Revo

Note: For use with SENSORLESS brushless motors only!
Input Battery Types: 2-4S LiPo/LiFe only
Maximum Current: 80-Amps
BEC Output: 5V
Controls: FWD/BRK, FWD/REV, FWD/BRK/REV
Adjustable Low-voltage Cut-off Protection
Throttle Signal Loss Protection
Thermal Overload Protection
Drag Brake Adjustment
Start Control Adjustment (Initial Punch)
Braking Force Adjustment
Dimensions (LxWxH):
58x46x36mm (2.28x1.81x1.41-in.)
  • Traxxas E-Maxx
  • Traxxas E-Maxx Brushless
  • Traxxas E-Revo
  • Traxxas E-Revo Brushless

Review Summary