LRP Motor ESC Combo Brushless Flow Works X20 13.5T LRP81131

Add $99.00 to receive Free for eligibility
reg $469.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the LRP X20 13.5T Stock Spec Brushless Motor and Flow Works Team Sensored Brushless Speed Control Combo.

ESC Features:
  • Seven fully adjustable parameters; Auto Brake, Feel, Torque Timing, Boost Timing, Boost Angle, Boost Turbo, and Cutoff Voltage
  • New, precise X-Brake Pro brake software
  • Internal Temp Check System 3 allows readout of maximum internal temperature of ESC and motor
  • Easysolder U tab design Heavy copper, multilayer PCB for low resistance
  • On road and off road software for modified and stock classes including boost 0
  • 6A/3V linear BEC
  • USB software updateability
  • Full aluminum case with heatsink

Motor Features:
  • Precision-balanced WorksTeam 12.45mm sintered rotor
  • Oversized ABEC 5 ball bearings
  • Five timing inserts with degree markings
  • XTEC X20 Coolmax Housing, machined 7075-T6 aluminum can with maximum cooling for lowest running temps
  • Fully waterproof, adjustable precise sensor
  • Optimized racing stack for improved drive feel and efficiency

One LRP Flow Works Team Sensored Brushless ESC with 12 AWG Motor and Battery Wires, Universal Receiver Connector, On/Off Switch, Sensor Wire, four Zip Ties and Instruction Manual, and a X20 Stock Spec 13.5T Brushless Motor
Case size:
1.2 x 1.3 x 0.83" (32 x 34 x 21mm)
Voltage Input: 3.7 - 7.4v
BEC: 6.0V/3.0A
Forward/Brake: Yes
Power Wires: 3.3mm
Rec. Motor Limit: 3.5T
Rated Current: 400A/phase
Typical Voltage Drop: At 20a - 0.011V/Phase
Weight (excl. wires): 1.4oz (40g)

Specific RPM/V (kV): 3050
Power (W): 253
Magnet Material: Sintered 12.45mm
Weight: 5.8oz (165g)
Winding: Star (multistrand copper winding)
Shaft Diameter: 0.125" (3.2mm)

Review Summary