MIP Pucks 17.5 Drive System Associated SC10 T4 MIP13130
MIP13130 MIP Pucks 17.5 Drive System Associated SC10 T4

MIP Pucks 17.5 Drive System Associated SC10 T4 MIP13130

Add $99.00 to receive Free Shipping...click for eligibility
reg $90.00
$74.99

In Stock.

This item qualifies for FREE SHIPPING
This is the MIP Pucks 17.5 Drive System Associated SC10, SC10.2, RC10T4, RC10T4.1, and RC10T4.2. This kit will fit any T4 or SC10 truck that’s equipped with the Associated Transmission Case (ASC9826).

Features:

  • Quicker acceleration
  • Lower motor temps
  • Replaceable Pucks to keep your drivetrain fresh
  • Hard Anodized 7075"T6 Aluminum
  • MIP Laser Etched Logo
  • Includes complete C-CVD Axle Set
  • 50% less rotating mass over stock steel components
  • Quicker deceleration
  • Less overall wear on drive components
  • Two sets of holes in the C-CVD bell
  • Race proven C-CVD Construction
  • Includes complete MIP Differential
  • For the Associated SC10, SC10.2, RC10T4, RC10T4.1, and RC10T4.2
  • 100% Quality made in the USA!

The MIP Puck Drive system is an aluminum based drivetrain system with aluminum C-CVD bones, aluminum differential outdrives, and replaceable plastic orange wear Pucks that take the place of inferior steel pins.

Includes:

(12) HW-BEARING/ 3/32in Chrome Steel Ball
(1) MIP Ball Diff Thrust Washers 1/4in x 3/32in Associated SC10 T4 B4
(1) HW-SHCS 2-56 x .92 Diff Screw
(1) HW-SPRING/ Ball Diff HPI Blitz
(2) HW-BEARING/ 5/32in x 5/16in x 1/8in Ball Bearing
(2) HW-Pin 1/16 x 3/8 Roll Pin
(2) MIP 3/16” CVD Coupling
(2) HW-SHSS 4-40 x 3/32 Cup Point
(8) MIP Pucks Orange No.1 Pucks
(1) MIP Lube & Thread Gel Cup
(1) MIP Pucks Male Aluminum Outdrive Associated
(2) MIP Pucks MIP C-CVD Aluminum Bone Associated SC10/T4
(1) MIP Ball Diff Gear 52T Associated SC10 T4 B4
(2) MIP Confetti Sticker
(2) HW-WASHER/ Diff Ring Associated SC10 B4 T4 GT
(7) HW-Bearing 1/16 Chrome Steel Ball
(1) MIP Thrust Retainer
(1) MIP Diff Thrust Cover Associated
(1) MIP T-Nut Molded Associated
(2) HW-Nut 8-32 Steel Locknut
(2) MIP Capture Rings
(2) HW-Pin 1/16 x .430 Solid Pin
(2) MIP Pucks No.1 Pins
(4) HW-BHCS 1-72 x 1/8
(1) Diff Lube & Grease Cup
(1) MIP Pucks Female Aluminum Outdrive Associated
(2) MIP C-CVD Axle B4 T4 Associated

Fits:
Associated SC10
Associated RC10T4.1
Associated RC10T4.2
Associated SC10.2
Associated RC10T4
  • Associated SC10 2WD
  • Associated SC10 4x4
  • Associated SC10GT

Review Summary