Speed control with two speeds forward, two speeds reverse and fuse.
12V high torque motor.
Pre-wired and pre-soldered connections.
Double sided tape for attaching speed control to servo.
One Midwest MEPS III Motorizing system with: Motor, two 5W resistors,
2A fuse w/ holder, wiper arm, wiring with (Kyosho-type) connectors and double sided tape.
Installing in boat (refer to the boat's construction manual for installing of the motor and radio equipment).
Two six cell flat battery packs with standard connector, CA glue to connect wiper to servo horn.
12 - 14.4V, 5 pole
RPM: 6500 @ 14.4V
Typical Current Draw: 1.3A