Mugen 1/10 Nitro Touring MTX5

Add $99.00 to receive Free for eligibility
reg $999.99

In Stock. Usually ships within 24 hours.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
Mugen MTX5 high tech pro level racing kit that is recommended for use on racing tracks only. Mugen MTX5 1/10 scale touring car is a chassis kit that must be assembled.

MTX5 touring car kit
Fuel Tank,
Diff Oil
Shock Oil


Radio with receiver
Two servos (with more than 100oz. of torque)
12 size rear exhaust engine
1/10 sedan manifold and pipe
200mm wide body
1/10 sedan wheels and tires
Length: 14.96" / 380mm
Width: Max. 7.87" / 200mm adjustable
Wheel Base: 10.13 to 10.25 / 257.5mm to 260.5mm adjustable
Front Caster Angle: 6.4? to 13.8? adjustable
Gear Ratio: 1st. 7.24:1 / 2nd. 4.69:1
  • Chassis: 0.12" (3mm) thick aluminum
  • Drive: Four wheel, three belt
  • Clutch: Three shoe
  • Shocks: Oil filled
  • Differentials: Planetary gear type with diff oil
  • Transmission: Two speed with aluminum shaft bracket
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Ackerman: Adjustable, Ackerman describes the effect of the inside front wheel turning faster than the outside front wheel during turns
  • Bumper: Front, foam Steering: Bellcrank type with servo saver
  • Mugen MTX5 Touring Car

Review Summary