Traxxas optional T-6 chassis for the T-Maxx 4WD radio control monster truck. This chassis is the backbone to which all major parts in the kit are installed. Fits both old and new versions of the T-Maxx.

Traxxas optional big bore shock set for the T-Maxx and E-Maxx Trucks. These replace the plastic shocks that come stock with the kit.

The gearboxes, shock towers and suspension arms mount to the bulkheads.

Traxxas lower chassis braces for the T-Maxx

Traxxas Sportmaxx Pro-Graphix Custom Body. This is the thin plastic body (shell) that covers the car's chassis and provides the "shape" of the car.

Traxxas replacement forward and reverse clutch bell for the T-Maxx 4WD Radio Control Monster Truck. This gear set is installed on the primary gear shaft in the transmission.

Traxxas pair of the XX Long Big Bore Shocks for the rear of Rustler, Stampede, Bandit and Slash.

Traxxas 27mHz Three Channel AM Receiver Without BEC for the Nitro T-Maxx and the E-Maxx Ready-To-Run-Kits. This Receiver is also supplied with the Traxxas TQ radio systems.

Traxxas disruptor body will fit the T-Maxx vehicle. The detailed design uses metallic silver, along with yellow, red, and white, over jet black. For use on both the SportMAXX and T-Maxx vehicles.

Traxxas blue anodized aluminum servo mounts for the T-Maxx. This package includes throttle/brake servo mounts and fits both the old and new versions of the T-Maxx.

Traxxas servo mounts for the T-Maxx

Traxxas replacement Lexan body for the T-Maxx Truck Kit. This body will also fit most 1/10 scale trucks.

Traxxas aluminum hex wheel hubs for the T-Maxx and E-Maxx truck kits.

Traxxas Clear Replacement Body for the SportMaxx Truck.

Traxxas optional center transmission skid plate for the T-Maxx. This piece covers the center area below the lower chassis braces.

Traxxas pair of the black shocks XX long. These shocks are used on the rear of many Traxxas electric and nitro vehicles.

Traxxas optional set of 102mm rear titanium turnbuckles for the T-Maxx 4WD Radio Control Monster Truck. These turnbuckles link the rear bulkheads to the axle carriers and provide toe-in adjustment for the rear wheels.

Traxxas optional set of 96mm Titanium Turnbuckles for the older Traxxas T-Maxx 4WD Radio Controlled Monster Truck. These turnbuckles link the front bulkheads to the axle carriers and provide toe-in adjustment for the front wheels.
**Will not fit on the newer 2.5 T-Maxx**

Traxxas exhaust header set for the Nitro 4-Tec and the Nitro Sport.

Traxxas pre-assembled tuned pipe for the Rustler.

Traxxas motor and 10 tooth pinion gear for the EZ Start 2 (R) System

Traxxas replacement EZ start control box for the EZ Start. This is the box that attaches to the 6-Cell battery and controls the start of the engine by pushbutton.

Traxxas updated stock replacement fuel tank for the T-Maxx. The fuel tank holds the fuel and screws directly to the chassis. This tank has been updated and NO LONGER has a PRIMER BUTTON.

Traxxas optional stainless steel suspension pin set for the T-Maxx or E-Maxx Monster Trucks. These suspension pins hold the upper and lower front and rear suspension arms to the bulkheads.