Traxxas short crankshaft version of the Traxxas TRX-15 Pro Engine. This crankshaft is for modelers who want higher performance than a .12 size engine in their 1/10 scale kits such as Nitro Stampede, RC-10GT or GTX.
This is a Non-Pull Start Version.

Integy gunmetal aluminum EC workstation stand for the Traxxas Revo Series.

Traxxas Pro Ball Differential for the Nitro Stampede, Nitro Rustler
and Nitro Sport.

Traxxas pair of the XX Long Big Bore Shocks for the rear of Rustler, Stampede, Bandit and Slash.

Traxxas long big bore shocks. They may be used on the front of Rustler, Stampede, Bandit and Slash.

Traxxas ball bearing set for the Stampede.

Traxxas Nitro Sport Body. This is the Clear Shell that goes over the chassis and protects it from debris.

Traxxas pair of replacement front shocks for the Stampede and Rustler trucks. The shock bodies are made of black plastic and there are four spring pre-load spacers (to vary the spring tension) for each shock.

Traxxas pair of the black shocks XX long. These shocks are used on the rear of many Traxxas electric and nitro vehicles.

Traxxas replacement tires for the Stampede kit. They can also be used on any other truck using standard 2.2" truck rims.

Traxxas tires that come stock for the Sledgehammer.

Traxxas exhaust header set for the Nitro 4-Tec and the Nitro Sport.

Traxxas pre-assembled tuned pipe for the Rustler.

Traxxas replacement EZ start control box for the EZ Start. This is the box that attaches to the 6-Cell battery and controls the start of the engine by pushbutton.

Traxxas stock replacement EZ start motor the the EZ Start System.

Traxxas low Profile Spike Tires for any Truck that uses 2.2" Tires

Traxxas aluminum engine mounting set for the Nitro Rustler and 1/10th scale stadium race truck.

This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.

Traxxas replacement lower chassis for the Nitro Sport Truck.

Traxxas replacement lower chassis is constructed of nylon and black in color.

INCLUDES: One Nylon Black Lower Main Chassis

Traxxas set of the telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks.

Traxxas rear suspension arms for the Electric SRT, Nitro Rustler, Nitro Sport and Nitro Stampede Kits.

Traxxas replacement hinge pin set for the TRX-1. These pins are made of stainless steel and have a 3mm diameter.

Traxxas replacement big bore shock cylinder for XXL sized shocks. This is the portion of the shock that contains the shock oil and piston.

Traxxas ball bearings are designed to fit the Nitro Buggy.