Traxxas TRX racing engines are fueled by a passion for performance, innovation and quality. Traxxas engineers are dedicated to redefining the state of the art in engine technology.

Traxxas complete transmission for the T-MAXX 2.5.

Traxxas short crankshaft version of the Traxxas TRX-15 Pro Engine. This crankshaft is for modelers who want higher performance than a .12 size engine in their 1/10 scale kits such as Nitro Stampede, RC-10GT or GTX.
This is a Non-Pull Start Version.

Traxxas optional T-6 chassis for the T-Maxx 4WD radio control monster truck. This chassis is the backbone to which all major parts in the kit are installed. Fits both old and new versions of the T-Maxx.

Integy Blue Aluminum EC Workstation Stand for the Traxxas T-Maxx Series.

Traxxas optional big bore shock set for the T-Maxx and E-Maxx Trucks. These replace the plastic shocks that come stock with the kit.

The gearboxes, shock towers and suspension arms mount to the bulkheads.

Traxxas lower chassis braces for the T-Maxx

Traxxas optional 4mm thick Chassis for the T-Maxx series. Fits all versions of the T-Maxx.

Traxxas set of Split Spoke satin chrome wheels and tires. Mounted for the Maxx's and Revo.

Traxxas blue anodized head for the Pro 15.

Traxxas blue ushra body for the T-Maxx. Covers and protects the chassis.

Traxxas SportTaxx Tires Upgrade Kit.

Traxxas replacement forward and reverse clutch bell for the T-Maxx 4WD Radio Control Monster Truck. This gear set is installed on the primary gear shaft in the transmission.

Traxxas pair of the XX Long Big Bore Shocks for the rear of Rustler, Stampede, Bandit and Slash.

Traxxas 27mHz Three Channel AM Receiver Without BEC for the Nitro T-Maxx and the E-Maxx Ready-To-Run-Kits. This Receiver is also supplied with the Traxxas TQ radio systems.

Traxxas set of 3.8" tires for the T-Maxx 4WD Monster Truck. These tires fit on the wheels of the T/E-Maxx and Revo.

Traxxas disruptor body will fit the T-Maxx vehicle. The detailed design uses metallic silver, along with yellow, red, and white, over jet black. For use on both the SportMAXX and T-Maxx vehicles.

Traxxas One-Way bearing for the T-Maxx 2.5. This is located at the EZ Start end of the crankshaft. This is the one way bearing for the starter.

Traxxas optional wheelie bar for all Traxxas Maxx series vehicles with traxxas factroy bumpers. Will not work with all aftermarket bumbers!

Traxxas blue anodized aluminum servo mounts for the T-Maxx. This package includes throttle/brake servo mounts and fits both the old and new versions of the T-Maxx.

Traxxas replacement Lexan body for the T-Maxx Truck Kit. This body will also fit most 1/10 scale trucks.

Traxxas aluminum hex wheel hubs for the T-Maxx and E-Maxx truck kits.

Traxxas optional center transmission skid plate for the T-Maxx. This piece covers the center area below the lower chassis braces.

Traxxas pair of the black shocks XX long. These shocks are used on the rear of many Traxxas electric and nitro vehicles.

Traxxas optional set of 102mm rear titanium turnbuckles for the T-Maxx 4WD Radio Control Monster Truck. These turnbuckles link the rear bulkheads to the axle carriers and provide toe-in adjustment for the rear wheels.

Traxxas optional set of 96mm Titanium Turnbuckles for the older Traxxas T-Maxx 4WD Radio Controlled Monster Truck. These turnbuckles link the front bulkheads to the axle carriers and provide toe-in adjustment for the front wheels.
**Will not fit on the newer 2.5 T-Maxx**

Traxxas pre-assembled tuned pipe for the Rustler.