| Based on Novak�s Velociti-Series Racing brushless motors, Novak is pleased to announce its new SS Pro-Series racing brushless motors. The SS Pro-Series is available in three motor winds:
SS8.5 Pro Brushless Motor is 8.5 turns, and similar to a 15-17-turn mild-modified brush motor (#3408)
SS10.5 Pro Brushless Motor is 10.5 turns, and similar to a 19-turn brush motor (#3410)
SS13.5 Pro Stock Brushless Motor is 13.5 turns, and similar to a 27-turn racing stock brush motor (#3413)
Although the #3413 SS13.5 is not a new motor, this popular stock brushless motor has received several new upgrades including a Novak sintered rotor, and will now be known as the SS13.5 Pro Stock Brushless Motor.
ADDITIONAL SS PRO MOTOR FEATURES
The SS Pro brushless motors will be equipped with all of the great standard features found on all Novak motors, including: a convenient Solder Tab System for easy wire replacement; Sensor-Based Technology for excellent starting torque, low-speed drivability, and smooth acceleration; the same Oversized Front Bearing used in Novak�s Velociti-series motors that is more rugged, extra durable, and helps extend motor life; and Thermal Overload Protection (when used with a Novak brushless ESC) that allows pack after pack to be run without fear of damaging the motor, battery, or speed control.
Of its many features, its sensor-based design allows for most of the motor's important benefits, including the following:
No Cogging--Thanks to constantly knowing the rotor position, the motor provides instantaneous throttle response & smooth transitions from neutral to drive. The rotor position knowledge is attained due to the ESC & motor being continuously synchronized via the motor harness.
Smooth & Controlled Low Speed Driveability--Always knowing the rotor angle is key to smooth acceleration without delivering abrupt and uncontrolled bursts of power.
Strong/Consistent Brakes & Starting Torque--Rotor position knowledge results in consistent starts & stops, without hesitation or inconsistent lag times before acceleration or braking--this translates to consistant lap times.
Thermal Protection--Position & temperature sensors inside motor provide unparalleled thermal protection, letting you to run pack after pack without worrying about overheating the motor, ESC, or magnets.
Each motor is factory hand-wound and is put through rigorous testing, including a final dyno test to ensure that each motor meets Novak�s rigid specifications.
ESC COMPATIBILITY
The SS8.5 Pro, SS10.5 Pro, and SS13.5 Pro Stock Brushless Motors are compatible with all Novak brushless ESCs, including:
#1705 Super Sport Plus ESC
#1710 GTB Programmable Brushless/Brush ESC
#1714 GTB 4-Cell Programmable Brushless/Brush ESC
#3006 original Super Sport ESC that�s included in the Super Sport Stock Brushless System (10.5)
GTB Brush/Brushless ESC
GTB 4-Cell Brush/Brushless ESC
PRO-SERIES BRUSHLESS SYSTEMS
Each SS Pro Series is available in a combo system factory-wired with a GTB Programmable Racing Brushless/Brush ESC (#1710). Novak brushless systems include everything to be race-ready, out of the box, so there is nothing extra to buy or install.
GTB/SS8.5 Pro Brushless System�this system is the perfect brushless system for use with sport battery packs and entry-level equipment. It is also ideal for off-road racing and general applications.
SS PRO BRUSHLESS MOTOR FEATURES
Sensor-based for excellent braking and low-speed driveability
High-performance Nickel-plated Sintered Neodymium rotor (ROAR-Approved!) for maximum motor acceleration, braking power, and performance in high-temperature conditions
Oversized front bearing for increased load handling and bearing life
Lightweight ribbed aluminum end bells
Provides approximately 20% longer run-times compared to brushed motors
Specifically designed for R/C vehicles
Direct-Solder Wiring Tabs for flexible soldering options
Minimal maintenance
User-replaceable rotor, front end bell/bearing, and rear bearing
Thermal Overload Protection (when used with a Novak brushless ESC)
No cogging
Factory hand-wound and race-tuned
Meets all ROAR specifications |
