NVK3066 Novak SLYDR Brushless Drift System

Factory Replacements

Hot New Product Lines

Home > Novak > Brushless Motor Systems >

Novak SLYDR Brushless Drift System – 6.5T

List Price: $444.00
Our Price: $279.95
You Save $164.05!

Product Code: NVK3066

Description

Technical Specs

DRIFT-SPEC BRUSHLESS MOTORS

Novak’s drift-specific SLYDR is a sensor-based system that is always aware of the rotor position. That knowledge provides the motor with superior starting torque and continuous synchronization for smooth, controlled low-speed driveability and consistent brakes – a must for drifting! The Drift-Spec series of motors also features a shielded sensor cable and a completely rebuildable design.

HV PRO BRUSHLESS/BRUSH ESC

Though the SLYDR Brushless Drift ESC has one throttle profile, the drift-specific ESC is completely programmable and packed with nine customizable parameters. Novak’s new Throttle Curve gives drivers the ability to experiment with three throttle responses – Linear, Expo-1 and Expo-2 – which range between a quick burst of power to a smoother, more controlled low-end power delivery. In addition, the SLYDR’s Brake Frequency adjustment contains seven degrees of adjustability from a smooth and controllable brake to a more abrupt and grabbier feel. The dozens of adjustments allow drivers to fine-tune their vehicle’s throttle braking for better control and advanced drifting.

But the customization doesn’t end with braking. Novak has also built into the ESC Li-Po Cut-Off Circuitry that prevents the batteries from going below the critical safety voltage level and a Motor Rotation feature that allows the user to easily select direction of the motor.

SLYDR Brushless Drift ESC Features:

Fully programmable throttle profile specifically developed for drifting
Nine adjustable parameters: Minimum Brake (10 settings from 3-50%), Drag Brake (10 settings from 3-50%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 2-12%), Throttle Curve (Linear, Expo-1 and Expo-2), Brake Frequency (7 settings from 1-8 kHz), Reverse, Motor Rotation and Li-Po Cut-Off
User-friendly interface and 4 different color status LEDs. User can fine-tune one parameter at a time without having to re-enter other parameters
Based on the Novak GTB Brushless ESC for ultimate brushless motor performance
Built-in Smart-Stop Li-Po Cut-Off Circuitry Protection to monitor battery voltage level
Independent programming of Drag Brakes and Minimum Brake for the ultimate braking control
One-Touch Set-Up for quick, easy transmitter setup
Smart Braking II enables users to "shift" from forward to reverse
Compatible with Novak’s 540-size sensored brushless motors down to 5.5 turns
Microprocessor-controlled
Gold-Plated PCB Direct-Solder Wiring Tabs
User-replaceable input harness (#5315) and remote power programming switch (#5602)
30x30x6mm cooling fan (#5648) mounted on factory-installed heat sink
Factory-installed Power Trans-Cap Module (#5679) for cooler operating temperatures
Water-resistant case
Locked Rotor Detection and Thermal Overload Protection
Novak’s Radio-Priority and Polar Drive Circuits
Meets RoHS compliance and includes 120-Day Warranty
Designed and assembled by Novak in Irvine, California, using globally-sourced components