| FEATURES: Ready to race out of the box, nothing else to buy Speed control factory wired to motor For use with 4-6 cells 120 day limited warranty on both components Velociti 4.5R Brushless Motor: Standard 540 size specifically designed for R/C vehicles One-piece high power Neodymium cylindrical magnet for high performance, improved rotor reliability and increased efficiency Full ball bearing design with oversize front bearing for smooth low-friction operation and superior torque handling ability Sensor based for excellent starting torque and excellent drivability Meets all ROAR specifications Direct solder tabs, locked rotor protection and thermal overload protection Maintenance free design GTB Electronic Speed Control: Can be used with brushless or brushed motors, has no brushed motor motor limit Compatible with Velociti 5.5 Racing, Velociti 6.5 Racing, SS5800 and SS4300. Four different color status LEDs for easy one touch setup and quick selection of 6 built-in throttle profiles 3 fully-programmable fwd/brake Brushless Profiles 1 fully-programmable fwd/brake Brush Motor Profile 1 fully-programmable fwd/brake/rev Brushless Profile 1 fixed programming Limited Reverse (25%) Profile Brushless mode has 4 adjustable parameters Minimum Brake, Drag Brake Deadband and Minimum Drive Brushed mode is fully programmable with all of the adjustments of the brushless mode plus Adjustable Drive Frequency One touch set-up, heat sink and cooling fan, replaceable input and switch harness, thermal overload protection and water-resistant case INCLUDES: GTB Electronic Speed Control with Cooling Fan, Velociti 4.5R Brushless Motor, Racing Power Trans Cap Module, Double-Sided Tape & Operating Instructions REQUIRES: Installing in vehicle SPECS: ESC: Length: 1.49" (37.8mm) Width: 1.16" (29.5mm) Weight: 1.36oz (38.5g) with heat sink, no wires Input Voltage: 4-6 cells (1.2V DC/cell) Brushless Motor Limit: Any Novak Motor Brush Motor Limit: None BEC (Battery Eliminator Circuitry): 6.0V/3.0A Rated Current: 540A (brushless per phase) 1620A (brush mode) On-Resistance: 0.00040 Ohms (brushless), 0.00013 Ohms (brush-mode) Throttle Profiles: 6 (5 brushless & 1 brush motor) Velociti 4.5R Brushless Motor: Diameter: 1.41" (35.8mm) Length: 2.08" (52.8mm) Shaft Diameter: 0.125" (3.2mm) Weight: 6.73oz (191g) Without Power Wires Number of Turns: 4.5 Voltage Handling: 6 Cells (1.2V DC/cell Commutation: Sensor Based Electronic Protection: Locked Rotor and Thermal Overload Power Wire: 14G Silicone Magnet: High-strength Neodymium (1-piece multi-pole) |
