Ofna DM-1 Spec Touring 80% 1/8 Kit w/DP8 Body OFN34303

Add $99.00 to receive Free Shipping...click for eligibility
reg $599.95

Out of Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the 1/8 scale Ofna DM-One Spec On-Road Touring Car 4WD with the PF8-GT Body. This kit comes 80% assembled.

One 1/8 scale 80% assembled Ofna DM-One Spec Touring Car with four oil-filled shocks, decals 2 speed clutch bell, 2 speed spur gear, body, wing, wheels, tires, sealed bearings, 4.2oz (125cc) fuel tank, 80wt shock oil, 10,000wt and 50,000wt diff oil, and instructions

3.5cc (.21 Class) rear exhaust engine
Minimum 2-Channel radio system with 2 servos, high speed servo
suggested for steering
Glow Starter: 1.2 volt
Paint: Polycarbonate safe spray or brush-on
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant
21.5" (546mm)
Width: 13.19" (335mm)
Weight: 8.3lbs (3765g)
Wheelbase: 13" (330mm)

23.2"  (590mm)
Width: 10.7"  (273mm)
Height: 5.5"  (140mm)
  • Chassis is made of CNC machined 6061 aluminum
  • Four wheel shaft drive, front universals
  • 4.2oz (125cc), flip top cap fuel tank
  • 3-shoe aluminum racing type clutch
  • Carbon fiber, low CG, sealed radio and battery box, with special transponder mount
  • Two-speed, shoe type transmission
  • Full set of sealed ball bearings
  • Four oil-filled shocks with 13mm diameter hard anodized, threaded aluminum bodies, mounted horizontally with CNC shock mount heat sink
  • 44 tooth and 48 tooth, nylon main gear
  • Three-shoe composite clutch
  • 16 tooth and 20 tooth, steel clutch bell
  • Enclosed gearboxes
  • Planetary differentials
  • Single disk brakes with high performance pads
  • High traction treaded tires with foam inserts 1.6" (42mm) wide, 3.9" (100mm) diameter
  • Black plastic wheels with multi-spoke design 1.6" (42mm) wide, 2.4" (60mm) diameter
  • Clear untrimmed PF8-GT body and rear wing
  • High impact plastic and foam front bumper
  • Front and rear pushrod sealed pivot ball type suspension with boot covers, front and rear adjustable blade sway bars, adjustable upper and lower roll centers and adjustable stops
  • Adjustable caster, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Adjustable camber, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Hard coated steering rack with laydown servo position and servo saver
  • Ofna DM-1 Spec

Review Summary