Ofna Hyper 7 TQ 1/8 Nitro Buggy with 2.4Ghz Radio JL.28 OFN14326

Add $99.00 to receive Free Shipping...click for eligibility
reg $549.95
$369.99

In Stock.

This item qualifies for BUNDLE & SAVE
This item qualifies for FREE SHIPPING
This is the Ofna Hyper 7 TQ Pro Nitro 1/8 Scale Off Road Racing Buggy. Ofna's Hyper 7 TQ Black RTR comes fully assembled.

The Ofna Hyper 7 TQ features a powerful Hyper Macstar .28 engine that comes bolted onto the chassis with an black tuned pipe for the speed and reliability you crave! This Ready-To-Run buggy will give you high-performance at an extremely affordable cost.

Includes:

One Ofna Hyper 7 TQ Pro rolling chassis with aluminum shocks, six universal drive shafts, painted body, tires, foam inserts, wheels, wrench aluminum front and rear braces, 47 tooth spur gear, fuel bottle, 14 tooth clutch bell, 2.4GHz 3-ch radio, .28 engine, 4-way wrench extra shock pre-tensioners, D-size glow starter and photo-illustrated manual

Requires:
AA Batteries: 12, eight for radio and four for receiver
D Battery: 1 for glow starter
Misc. Items: Building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant
Vehicle
Length:
19.6" (498mm)
Width: 13.8" (310mm)
Height: 7.3" (185mm)
Weight: 7.7 lbs (3500g)(approx.)
Wheelbase: 12.9" (327mm)  (wheels on-center front-to-rear)

Tread Front/Rear (wheels on-center side-to-side)
Front Track:
10.2" (258mm)
Rear Track: 10.2" (258mm)

Tires
Front:
3.2" x 1.7" (81x43mm)
Rear: 3.2" x 1.7" (81x43mm)

Body
Length:
15" (380mm)
Width: 8-5/8" (220mm) at widest point
Height: 3-3/4" (95mm)
  • Chassis is made of hard coated countersunk aluminum, 0.12" (3.2mm) thick
  • Four wheel shaft drive
  • Shock towers are aluminum with bellcrank plate, fuel filter and suspension arm plates
  • Radio tray plate is graphite with transponder mount and bellcrank/front chassis brace
  • Front and rear one piece torsen braces, purple anodized
  • 3-channel 2.4GHz LED Edition Radio with steering and throttle trim and reverse, two servos
  • Ofna Hyper .28 Engine with glow plug, slide valve carburetor and pull-starter
  • Two chamber polished natural finish aluminum tuned exhaust pipe
  • Fuel Tank is 4.6oz (135cc) with a flip top cap
  • 3-shoe Clutch
  • Single speed transmission
  • Full set of ball bearings included
  • Oil-filled shocks with anodized aluminum bodies with coil over springs, 0.14" (3.5mm) shaft diameter and rubber shock shaft boots
  • 14 tooth Clutch Bell
  • 47 tooth Main Gear, steel construction
  • Sealed Gearbox, both Front and Rear
  • Front, center and rear planetary differentials
  • Single disk front and rear brakes with Feonado pads
  • Tires: 4-1/4" (102mm) diameter 1-5/8" (41mm) wide Avenger tires
  • Wheels: 3-1/4" (81mm) diameter 1-5/8" (41mm) wide that accept a 17mm drive hex
  • Painted and trimmed buggy body
  • Front high strength bumpers
  • Front and rear double wishbone suspension with CNC milled 7075 rear components, hard coated suspension plates
  • Adjustable caster/toe-in
  • Adjustable camber
  • Plastic Bell Crank
  • Servo Saver included, built into the right bellcrank
    • Ofna Hyper 7 TQ

    Review Summary